How well does RFID energy pass through objects?
15 June 2005
Telecoms, Datacoms, Wireless, IoT
Information from Trolley Scan
RFID (radio frequency identification) has the ability to identify tags that are not optically visible from the reader. Passive tags extract their operating energy from the energising field radiated by the reader, which available energy decreases as it travels away from the reader, placing a limit on the operating range that can be achieved with a specified radiated power and transponder sensitivity.
What happens when the energy has to pass through a ream of paper, or a plank of mahogany wood, before getting to the transponder. The short answer is that only 37% of the energy is going to pass through the paper, or 53% through the wood. And this does not matter whether the object is only a couple of centimetres thick, or more than 10 cm thick.
The reason for this loss of energy transmission relates to a property of the material called 'dielectric constant'. Wherever the energy wave encounters a change in dielectric constant (eg, air-to-paper, paper-to-air), part of the energy is reflected at the transition layer and never reaches the tags. Engineers who have experience in high resolution short range radar, such as ground penetrating radars, use this principle to detect objects buried in the ground.
The reflected energy caused by the transition of dielectric constant, results in a benefit to users of UHF RFID in that the radio signals also reflect off walls and floors, allowing tags that might normally be screened via a direct path approach, to get their energy from redirected reflected energy.
If you would like to know more, a detailed presentation, together with tables showing the reflection and transmission percentages for a variety of materials can be seen at www.trolleyscan.com/refltran.html
Further reading:
Full sensor to cloud solution
CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...
Long-range Wi-Fi HaLow module
TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...
SIMCom’s A7673x series
Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.
Read more...
Long-range connectivity module
Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...
4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...
Antennas to meet all connectivity requirements
Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...
Introducing SIMCom’s new A7673X series
Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...
18 W monolithic microwave amplifier
RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
Read more...
printer friendly version