Manufacturing / Production Technology, Hardware & Services


Wall-mounting and desktop enclosures

15 June 2005 Manufacturing / Production Technology, Hardware & Services

OKW's Diatec range of ergonomic wall-mounting and desktop enclosures have a modern flat form with contoured edges and a central recessed control area for mounting a membrane keypad or display module.

Typical applications include door entry systems, time loggers, detections systems, communications devices, and wellness and medical equipment.

The Diatec range comprises two basic sizes - external dimensions of 210 x 200 x 48 mm and 270 x 200 x 48 mm. The central control area is recessed by 2,5 mm and measures 120 x 128, or 180 x 128 mm.

The cases are moulded in off-white ABS (UL94HB) and have four moulded parts: the top and base parts and two contoured side panels that are snapped into place. The interior of the case can also be subdivided using accessory slot-in panels. Screw pillars are also provided in the top and base for mounting PCBs. The hinged lid accessory covers the control area and is available in solid ABS or translucent polycarbonate.

For wall-mounted applications, the base part also functions as a wall bracket with pre-moulded fixing points. Flush and recessed areas in the base part are designed for installation and protection of interfaces, cable glands, connectors etc. Power cables can enter the case via the underside or base panel. Two 1,5 V AA or a single 9 V cell can alternatively be accommodated in the base part.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Hybrid capacitors combine the best of both worlds
26 February 2020, Avnet South Africa , Power Electronics / Power Management
The different properties of EDLCs, Li-ion batteries and Li-ion capacitors suits each technology to various different applications.

Read more...
V2X: The future of vehicle communications
29 January 2020, Avnet South Africa , Editor's Choice, Telecoms, Datacoms, Wireless, IoT
A recent report by Juniper Research forecasts that more than 62 million vehicles will be capable of vehicle-to-vehicle communication by 2023; up from just over 1,1 million in 2019.

Read more...
STM32 system-on-chip for LoRa
29 January 2020, Avnet South Africa , Telecoms, Datacoms, Wireless, IoT
Powering the search for sustainability through smart infrastructure and logistics, smart industry and smart living, STMicroelectronics has revealed the world’s first LoRa system-on-chip (SoC) for connecting ...

Read more...
EERAM memory solutions retain data at power loss
29 January 2020, Avnet South Africa , DSP, Micros & Memory
Microchip Technology announced a new family of Serial Peripheral Interface (SPI) EERAM memory products that offers system designers up to 25% cost savings over the current serial non-volatile ram (NVRAM) ...

Read more...
Non-inverting converters for buck or boost operation
29 January 2020, Avnet South Africa , Power Electronics / Power Management
Texas Instruments introduced a family of four high-efficiency, low-quiescent-current (IQ) buck-boost converters that feature tiny packaging with minimal external components for a small solution size. ...

Read more...
Lithium-ion/polymer battery packs catalogue
29 January 2020, Avnet South Africa , Technical Literature
The latest edition of the Avnet Abacus standard lithium-ion/polymer battery packs catalogue covers the company’s portfolio of primary and secondary cells from leading battery manufacturers, as well as ...

Read more...
Tiny buck-boost converters
25 November 2019, Avnet South Africa , Power Electronics / Power Management
Texas Instruments introduced a family of four high-efficiency, low-quiescent-current (IQ) buck-boost converters that feature tiny packaging with minimal external components for a small solution size. ...

Read more...
What differentiates EMS companies
EMP 2020 Electronics Manufacturing & Production Handbook, Omnigo , Editor's Choice, Manufacturing / Production Technology, Hardware & Services
One of the major factors that differentiate electronics manufacturers from each other is the quality of the product that they deliver to the client and the time frame that they deliver the product within.

Read more...
How to use spot mask for wave soldering and conformal coating
EMP 2020 Electronics Manufacturing & Production Handbook, Testerion , Editor's Choice, Manufacturing / Production Technology, Hardware & Services
Mask is applied over the open through-holes on a circuit board in the wave soldering process to make sure they stay open. This is necessary because without mask, any contact area on the bottom of the PCB will be fluxed and subsequently soldered.

Read more...
Next-gen UV cure conformal coatings increase performance and speed up production
EMP 2020 Electronics Manufacturing & Production Handbook, Vepac Electronics , Editor's Choice, Manufacturing / Production Technology, Hardware & Services
Electronic circuits are becoming ubiquitous in modern life. Everywhere one looks, more and more processes that were once isolated and manual in nature, are being automated and now connected as the Internet ...

Read more...