Hittite Microwave has introduced seven new GaAs MMIC I/Q Mixers targeted to VSAT, microwave radio, test equipment, sensor and military applications from 6 to 23,6 GHz. The HMC526/7/8 GaAs MMIC I/Q Mixer die offer IF bandwidth of up to DC to 3,5 GHz, conversion loss as low as 7,5 dB, and Input IP3 as high as +30 dBm. As a result of their monolithic construction, they provide LO to RF isolation of up to 50 dB, and Image Rejection as high as 40 dB. Where a surface mount package is preferred, Hittite's HMC521/3/5/6 are now available in RoHS compliant, leadless 4x4 mm SMT packages (-LC4 suffix). They provide RF/LO coverage from 4 to 23,6 GHz with DC-3,5 GHz IF bandwidth, and Input IP3 as high as +28 dBm. Image Rejection and LO to RF isolation are outstanding at up to 40 dB and 50 dB respectively, while each of these mixers can be configured for either Image Reject or Single Sideband Upconverter applications.
New GNSS passive patch antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The HP24510A from Taoglas is a stacked patch GNSS passive antenna that operates from 1215 to 1610 MHz covering the L1/L2 GNSS spectrum.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...6 – 18 GHz driver amplifier RF Design
Telecoms, Datacoms, Wireless, IoT
The QPA0022D from Qorvo is a high-performance driver amplifier covering a range of 6 to 18 GHz and fabricated on Qorvo’s production 0,15 µm pHEMT process.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...Dual-channel ADC for RF applications RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
Read more...3,75 GHz RF inductor RF Design
Passive Components
The ceramic chip wire wound inductor from Coilcraft features a DC resistance of 1 O, a DC current of 175 mA, and a self-resonant frequency of 3,75 GHz.
Read more...Infineon launches Edge Ai software solution Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...IoT in a Box RF Design
Telecoms, Datacoms, Wireless, IoT
RAKwireless and Datacake have collaborated on a solution called ‘Real IoT in a Box’ to address the complexities of deploying IoT solutions, particularly when it comes to LoRaWAN.
Read more...Direction-finding antenna board RF Design
Telecoms, Datacoms, Wireless, IoT
u-blox’s ANT-B11 Bluetooth 5.1 direction-finding antenna board is a compact Bluetooth Low-Energy angle-of-arrival antenna and sensor board combined.
Read more...DC to 40 GHz termination RF Design
Enclosures, Racks, Cabinets & Panel Products
The TS400HM from Inmet by Spectrum Control is a 50 O termination that operates from DC to 40 GHz, and can handle an average input power of 1 W.
printer friendly version