Circuit & System Protection


Surge protection device with RFI suppression filter

13 July 2005 Circuit & System Protection

Phoenix Contact's surge protection device, the SFP 1-20/120AC, combining surge protection with a protection circuit against high frequency interference. The robust housing is DIN-rail mountable and can be easily retrofitted with existing power supplies.

The protection device is rated for a maximum nominal current of 20 A and a nominal voltage of up to 120 V a.c. The integrated varistors are thermally-monitored. If the protection circuitry is overloaded as a result of too frequent or excessive demands, the varistors are safely cut off from the mains supply. In this case an indicator lamp on the housing signals the overload status. For remote monitoring, a changeover contact with floating earth is integrated into the protection unit.

The protection unit is specially conceived for the requirements of the American and Asian markets. The arrester protection circuit meets the requirements of UL 1449 ED.2 according to IEEE, and the filter circuit meets the requirements of UL 1283.

For more information contact Alex Schneider, Phoenix Contact, +27 (0)11 793 7121, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Clearing the Static: Effectively control static in your workplace
Actum Electronics Circuit & System Protection
Controlling electrostatic discharge in the workplace is crucial to protect sensitive electronic equipment from damage. Implementing an ESD control program involves various measures and tests.

Read more...
Clearing the Static: Staying grounded: Ensuring effective ESD control
Actum Electronics Circuit & System Protection
To maintain reliable electrostatic discharge control, regular testing and accurate measurement are essential, with grounding products and ESD testing equipment being vital.

Read more...
Clearing the Static: ESD component safety in storage and transportation
Actum Electronics Circuit & System Protection
Conductive containers create a Faraday cage effect, safely channelling electrostatic charges away from the components inside.

Read more...
New connector for Push-X technology
Phoenix Contact Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.

Read more...
Safe connection under load
Phoenix Contact Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.

Read more...
Tuning knobs in modern designs
Phoenix Contact Switches, Relays & Keypads
Teaser: OKW’s latest tuning knobs, include optional LED illumination, flush-fitting installation, and a main body which is slightly inclined towards the internal axis.

Read more...
Connectors for energy storage systems
Phoenix Contact Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.

Read more...
Clearing the Static: Conductive foot, heel and shoe grounders
Actum Electronics Circuit & System Protection
Conductive foot, heel and shoe grounders are used in electrostatic discharge protected areas to provide a path to ground for static electricity.

Read more...
LED driver for industrial power supply indication
Altron Arrow Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.

Read more...
Clearing the Static: Cleaning in an ESD-protected area
Actum Electronics Circuit & System Protection
Cleaning in a protected electrostatic discharge area is a critical task to maintain the integrity of sensitive electronic components and prevent damage caused by static electricity.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved