Passive Components


Low-profile high-current inductors

10 August 2005 Passive Components

Vishay has extended its IHLP family of low-profile, high-current inductors with two new devices offering inductance ranges of 0,1 μH to 2,2 μH (IHLP-2525EZ-05) and 3,3 μH to 10 μH (IHLP-2525EZ-01).

Claimed to have the lowest DCR/μH for their respective package sizes, the IHLP inductors can serve as high-performing, space- and power-saving solutions for voltage regulator module (VRM) and DC-DC converter applications.

These inductors measure 6,47 x 6,86 mm with a maximum height profile of 5 mm. Both occupy the Standard 2525 footprint shared by lower-profile IHLP devices while providing higher rated current and lower DCR values. The devices are specified for saturation currents ranging from 10 A to 70 A, typical DCR values ranging from 0,81 mQ to 53,3 mQ, and maximum DCR values ranging from 0,93 mQ to 56 mQ. They feature ±20% inductance tolerance and operate over a frequency range up to 5 MHz. They are specified for an operating temperature range of -55 to +125°C.

For more information contact Ashley Sundraj, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Accelerate development of physical AI deployments
Altron Arrow DSP, Micros & Memory
With Avocado OS now available on the HummingBoard RZ-V2N- AIoT and SolidSense AIoT V2N from SolidRun, teams can move from prototype to deployed fleet in weeks.

Read more...
SMT flat-wire inductor for automotive electronics
Passive Components
Würth Elektronik introduces its new WE-SFIA series of flat-wire inductors in 2010, 2013, and 2016 packages.

Read more...
Nanocrystalline cores for cable assembly
Passive Components
Conventional MnZn and NiZn ferrite cores for cable assembly are now complemented by nanocrystalline cable cores.

Read more...
Universal NFC device
Altron Arrow DSP, Micros & Memory
Delivering high-end performance in a compact 4 x 4 mm package, the multipurpose NFC reader from ST Microelectronics, enables the convenience of contactless interaction and features for various end applications.

Read more...
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow AI & ML DSP, Micros & Memory
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Heat sinks for power-electronics and IC components
Passive Components
Würth Elektronik introduces heat sinks for power-electronics and IC components.

Read more...
SoC brings scalable edge AI to life
Altron Arrow AI & ML
The NXP i.MX 937 applications processor is optimised for performance without excessive power draw and bridges the gap between entry-level chips and high-end processors.

Read more...
Accelerate STM32-based IoT development with SPI EEPROM board
Altron Arrow Computer/Embedded Technology
ST Microelectronics’ ready-to-use STM32 expansion board helps design more efficient battery-friendly IoT devices based on ultra low power 32-Mbit Page.

Read more...
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Cooling solutions for modern electronics
Future Electronics Passive Components
As electronic systems become more compact and powerful, effective thermal management has become a critical aspect of product design.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved