Opto-Electronics


Smallest 4 Mbps FIR infrared transceivers

10 August 2005 Opto-Electronics

Vishay Intertechnology has introduced what it claims is the industry's smallest FIR (fast infrared) IrDA transceivers to date, at only 1,9 mm high and 6 x 3 mm footprint. The new thin TFBS6711 and TFBS6712 transceivers work over a typical distance of 50 cm at data rates up to 4 Mbps. Previously, designers needing a low-profile transceiver were forced to choose a relatively slow SIR (serial infrared) transceiver. The TFBS6711/2 are also capable of transmitting remote control (TV, HiFi) signals over a distance of 6,5 m. The TFBS6711 I/O voltage is defined by the external power supply voltage. The TFBS6712 I/O voltage equals 1,8 V, allowing direct connection to 1,8 V microcontrollers. Both transceivers operate from 2,4 V to 3,6 V, supply current of 1,7 mA, and shutdown current of 0,01 μA.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Accelerate development of physical AI deployments
Altron Arrow DSP, Micros & Memory
With Avocado OS now available on the HummingBoard RZ-V2N- AIoT and SolidSense AIoT V2N from SolidRun, teams can move from prototype to deployed fleet in weeks.

Read more...
Universal NFC device
Altron Arrow DSP, Micros & Memory
Delivering high-end performance in a compact 4 x 4 mm package, the multipurpose NFC reader from ST Microelectronics, enables the convenience of contactless interaction and features for various end applications.

Read more...
Compact low-power 32-bit platform
EBV Electrolink DSP, Micros & Memory
Microchip’s PIC32CM PL10 microcontroller family expands the company’s Arm Cortex-M0+ portfolio, delivering a compact, low-power 32-bit platform designed for cost-sensitive embedded applications.

Read more...
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow AI & ML DSP, Micros & Memory
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
SoC brings scalable edge AI to life
Altron Arrow AI & ML
The NXP i.MX 937 applications processor is optimised for performance without excessive power draw and bridges the gap between entry-level chips and high-end processors.

Read more...
Accelerate STM32-based IoT development with SPI EEPROM board
Altron Arrow Computer/Embedded Technology
ST Microelectronics’ ready-to-use STM32 expansion board helps design more efficient battery-friendly IoT devices based on ultra low power 32-Mbit Page.

Read more...
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Edge AI improves condition monitoring
EBV Electrolink AI & ML
STMicroelectronics has introduced the IIS3DWB10IS, an intelligent MEMS vibration sensor designed for high-performance industrial condition monitoring applications.

Read more...
Generating negative voltages from a positive supply
Altron Arrow Editor's Choice Passive Components
It is common for IoT devices, industrial sensors, meters, and medical equipment to require both a positive and negative voltage, and this article explains the options available to produce a negative rail from a positive rail supply.

Read more...
Addressing latency and signal integrity challenges
Altron Arrow DSP, Micros & Memory
Strengthening Microchip Technology’s data centre solutions portfolio, its XpressConnect retimers support high-bandwidth architectures, while helping reduce integration complexity.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved