Maxim has introduced what it claims are the world's most highly integrated digital-to-analog converters (DACs), the only monolithic (single silicon chip), 16-bit, 32-channel devices with offset and gain calibration. The MAX5762-MAX5765 (16-bit) and MAX5773/4/5 (14-bit), are claimed to be the most precise and most compact 32-channel DACs that integrate a programmable offset and gain calibration algorithm. The DACs reduce system cost and space requirements by eliminating the need for external offset and gain correction circuitry, output amplifiers, filters, or capacitors. At the 16-bit level, they guarantee integral non-linearity of 0,012% FSR (max), and differential nonlinearity of less than 1 LSB. Each of the four output voltage ranges (0 to +5 V, 0 to +10 V, -2,5 V to +7,5 V, and ±5 V) maintains linearity to within 200 mV of rails. Packaged in a 10 x 10 mm 68-pin TQFN or 12 x 12 mm 64-pin TQFN, the small footprint and superior linearity make them well-suited for industrial applications, including automatic test equipment, fibre-optics, and data acquisition.
Ultra-low power MEMS accelerometer Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.
Read more...NeoMesh on LoRa CST Electronics
Telecoms, Datacoms, Wireless, IoT
Thomas Steen Halkier, CEO of NeoCortec, recently gave a keynote speech where he spoke about “NeoMesh on LoRa: Bringing true mesh networking to the LoRa PHY”.
Read more...BT Audio 4 Click board Dizzy Enterprises
Analogue, Mixed Signal, LSI
The BT Audio 4 Click board from MIKROE provides high-quality wireless audio streaming and data comms over Bluetooth.
Read more...Precision MEMS IMU modules Altron Arrow
Analogue, Mixed Signal, LSI
The ADIS16575/ADIS16576/ADIS16577 from Analog Devices are precision, MEMS IMUs that includes a triaxial gyroscope and a triaxial accelerometer.
Read more...MEMS with embedded AI processing Altron Arrow
Analogue, Mixed Signal, LSI
STMicroelectronics has announced an inertial measurement unit that combines sensors tuned for activity tracking and high-g impact measurement into a single, space-saving package.
Read more...High-performance IMU RS South Africa
Analogue, Mixed Signal, LSI
TDK Corporation has announced availability of the new InvenSense SmartMotion ICM-536xx family of high-performance 6-axis IMUs.
Read more...New 3dB hybrid couplers Electrocomp
Telecoms, Datacoms, Wireless, IoT
Designed to facilitate the continued evolution of high-frequency wireless systems in various market segments, the new DB0402 3dB 90° hybrid couplers provide repeatable high-frequency performance compatible with automated assembly.
Read more...High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...Robust series of vertical-mating battery connectors Electrocomp
Interconnection
KYOCERA AVX has further expanded its industry-leading selection of standard battery connectors with the introduction of the new 9155-900 Series 2,5 mm-pitch vertical-mate battery connectors.
Read more...Dual accelerometers on the same die Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version