Computer/Embedded Technology


S-MAX with Pentium M technology

5 October 2005 Computer/Embedded Technology

For its all-in-one S-MAX controller, Phoenix Contact needed a processor designed for robust industrial environments that would eliminate heat and vibration problems. It chose Pentium M technology to satisfy the rising demands placed on control systems for more computing power.

The Pentium M processor, at 1,1 GHz, provides the same computing power as a Pentium IV 2,0 GHz processor, but uses less energy. As a result, systems that so far had to be kept separate, like HMI, PLC and industrial PCs, can be combined in one device due to the S-MAX controller platform, says the company.

Apart from the 6,4" system, Phoenix Contact now also provides equipment with 12", 15" and 17" displays as well as without displays, which support all common standards like Ethernet, DVI-X and USB. Communication with higher levels, other distributed controllers and I/O components takes place via Ethernet TCP/IP or Profinet as well as standard fieldbus systems. A Sercos interface is provided for networking drives, which the company says saves time and costs on ordering, set-up and servicing.

For more information contact James White, Phoenix Contact, +27 (0)11 793 7121, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.

Read more...
Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...
Versatile PoE extender
Vepac Electronics Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
New connector for Push-X technology
Phoenix Contact Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.

Read more...
Safe connection under load
Phoenix Contact Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.

Read more...
Tuning knobs in modern designs
Phoenix Contact Switches, Relays & Keypads
Teaser: OKW’s latest tuning knobs, include optional LED illumination, flush-fitting installation, and a main body which is slightly inclined towards the internal axis.

Read more...
Connectors for energy storage systems
Phoenix Contact Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.

Read more...
QuecPi smart development board
iCorp Technologies Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.

Read more...
Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved