Power Electronics / Power Management


Compact 230 V true sinewave inverter power supply

22 November 2000 Power Electronics / Power Management

A quick and practical power solution for situations where the local electricity network is not available is offered by ASP of Switzerland. The company's Piccolo supplies power immediately, where it is required, and is as practical as a portable wall-socket, says the company. The 230 V a.c current inverter is true sinewave so there are no power restrictions when using inductive consumers such as motors, pumps, energy saving lamps etc. The power pack is also extremely compact.

The Piccolo 12 accepts an input voltage of 10,5 to 16 V d.c. and the Piccolo 24 accepts an input voltage of 21 to 32 V d.c.. The nominal outputs are 150 and 250 W respectively, which can be exceeded for short periods. The output voltage rating is 225 V a.c. (±5%) and 50 Hz (±1%). The Piccolo 12 and 24 have approximate dimensions of 110 x 75 x 190 mm, weigh 1,8 and 2,5 kg, and comsume <2 and <2,5 W respectively.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Powering the IoT
Uniross Batteries Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.

Read more...
The move to DC infrastructure
IOT Electronics Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.

Read more...
Power inductor for automotive applications
Würth Elektronik eiSos Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.

Read more...
High-performance DC-DC converter
Conical Technologies Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.

Read more...
DC-DC converters for next-generation IoT
iCorp Technologies Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.

Read more...
240 W in compact form factor
Brabek Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.

Read more...
You cannot manage what you cannot measure
Power Electronics / Power Management
South African sites are generating solar energy. Most still have no idea what is consuming it… or when, or why. Intelligent load management hardware is changing that.

Read more...
Scalable and intelligent power solution
Power Electronics / Power Management
Designed for Africa’s rapidly evolving energy landscape, Bluetti’s ES125 offers a scalable, intelligent power solution that delivers reliable and cost-efficient electricity for uninterrupted operations.

Read more...
Simulating grid abnormalities
Conical Technologies Power Electronics / Power Management
Simulating grid abnormalities has become an essential part of validating systems such as inverters, UPS units, photovoltaic inverters, and EV charging infrastructure.

Read more...
Evaluation board for STPMIC25 PMIC
Power Electronics / Power Management
The STEVAL-PMIC25V1 is a power management IC evaluation board for the highly integrated STPMIC25, which is designed to manage the power requirements of the core, memory, and interfaces of the STM32MP2x series MPU.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved