Analogue, Mixed Signal, LSI


USB peripheral controller with 26 MHz SPI interface

2 November 2005 Analogue, Mixed Signal, LSI

Maxim's MAX3420E integrated circuit is a 12 Mbps USB peripheral controller with an SPI interface. This device integrates all the necessary digital logic and analog circuitry to implement a full-speed USB peripheral compliant to the USB specification 2.0. The company says the MAX3420E makes it easy to add USB to any microprocessor. Functions include: a ±15 kV ESD-protected USB transceiver; a USB serial interface engine (SIE); endpoint buffer memory; an SPI slave interface; integrated logic-level translators; and a 1,5 kΩ D+ pullup resistor. The MAX3420E operates using a register set accessed by the SPI interface, which operates up to 26 MHz. Any SPI master (microprocessor, ASIC, DSP, etc.) can add USB functionality using the 3- or 4-wire interface. The MAX3420E operates over -40 to +85°C and comes in a 7 x 7 mm, 32-pin TQFP and 4 x 4 mm, 24-pin TQFN package.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Multi-sensor IoT module
29 July 2020, Electrocomp , Telecoms, Datacoms, Wireless, IoT
TDK announced worldwide availability of the InvenSense SmartBug, a compact, wireless multi-sensor solution designed for a plethora of commercial and consumer IoT applications. The out-of-the-box solution ...

Read more...
DIN rail enclosures
30 June 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has announced its 1597DIN family of UL94-V0 flame-retardant plastic enclosures for mounting to standard IEC/EN 60715 35 mm DIN rails for applications such as industrial control equipment, ...

Read more...
CeraCharge now available in a small packing unit
30 June 2020, Electrocomp , Passive Components
TDK is presenting a new packing unit for CeraCharge, the world’s first SMD technology solid-state rechargeable battery, in the compact size EIA 1812 (4,4 x 3,0 x 1,1 mm). The packing unit (B73180A0101M199) ...

Read more...
Robust temperature sensor for E-mobility
30 June 2020, Electrocomp , Analogue, Mixed Signal, LSI
The new B58703M1103A* temperature sensor is specially developed for demanding E-mobility applications, which call for high long-term stability. The NTC sensor is designed for a temperature range of -40°C ...

Read more...
USB Type-C power delivery controller
30 June 2020, CST Electronics , Power Electronics / Power Management
The MAX77958 from Maxim Integrated is a robust solution for USB Type-C CC detection and power delivery (PD) protocol implementation. It detects connected accessories or devices by using Type-C CC detection ...

Read more...
Sensor signal conditioning IC
30 June 2020, Hi-Q Electronics , Analogue, Mixed Signal, LSI
New from Renesas Electronics is the ZSSC3240 sensor signal conditioner (SSC) – the newest member of its leading-edge SSC portfolio. The ZSSC3240 delivers high accuracy, sensitivity and flexibility for ...

Read more...
Thick-film chip resistors
29 April 2020, Electrocomp , Passive Components
Bourns announced the introduction of its new Model CR01005 series thick-film chip resistor. This extra small – 01005 inch (0402 metric) – CR01005 series broadens the general purpose thick-film chip resistor ...

Read more...
Highly accurate 1-wire temperature sensor
29 April 2020, CST Electronics , Analogue, Mixed Signal, LSI
The MAX31825 temperature sensor from Maxim Integrated provides 8-bit to 12-bit Celsius temperature measurements with better than ±1°C accuracy from 0°C to +70°C and ±1,75°C from -45°C to +145°C. The ...

Read more...
HDMI 2.1 active switch
29 May 2020, Altron Arrow , Analogue, Mixed Signal, LSI
Diodes Incorporated announced the PI3HDX12221, an HDMI 2.1 active switch with linear ReDriver that enables manufacturers of TVs, PCs, gaming consoles and set-top boxes to adopt the latest 12 Gbps HDMI ...

Read more...
Board-mount pressure sensors
29 May 2020, TRX Electronics , Analogue, Mixed Signal, LSI
The ABP series of board-mount pressure sensors from Honeywell are fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity, ...

Read more...