550 kHz dual controller eliminates two separate DC/DC converters
22 November 2000
Power Electronics / Power Management
Linear Technology's LTC1874, a dual output current mode step-down DC-DC converter that includes two 550 kHz controllers in a small, narrow 16-lead SSOP, is claimed to reduce layout space by replacing the need for two DC-DC converters and allows the use of small inductors and capacitors. The input voltage range for each controller is 2,5 to 10 V with an output adjustable as low as 0,8 V. Each controller consumes only 270 µA but can deliver up to 5 A of load current. The IC's compact dual output voltage design is ideal for powering ASICs, microcontrollers and DSPs in applications ranging from telecom to portable devices.
The LTC1874 drives external P-channel MOSFETs and uses sense resistors to accurately deliver power to the load at up to 94% efficiency. Further, the use of P-channel MOSFETS also maximises the life of a battery source by allowing very low dropout operation. The IC provides +2,5% output voltage accuracy and is configured with Burst Mode operation, which enhances efficiency at low output current. Each controller has a separate shutdown pin allowing full control of each output voltage.
Insight
(021) 674 4103
Further reading:
Rugged railway-grade DC-DC power modules
iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...
Four-quadrant regenerative grid simulator
Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...
90 W PSU with 150% boost capability
Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...
Standalone USB PD controller
Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...
Power module enhances AI data centre power density
Altron Arrow
Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.
Read more...
MIL-Spec DC-DC power converters
Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...
Compact power MOSFET for high current switching
Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...
DC link capacitors for demanding applications
RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...
N-channel power MOSFETs
TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
Read more...
Smart power protection, simplified
TRX Electronics
Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.
Read more...