Audio decoding DSP, memory and CD functions integrated in single device
8 February 2006
DSP, Micros & Memory
Toshiba Electronics Europe has extended its family of system-on-chip (SoC) audio digital signal processors (DSPs) with two new devices that combine decoding capability for MP3, WMA, ATRAC and AAC, along with CD control and amplification functions.
The company's TC94A70FG SoC device provides all necessary CD and audio processing functionality - including 1 Mbit of SRAM - in a single 100-pin QFP. The TC94A73MFG system-in-package (SiP) uses the same package to integrate the TC94A70FG along with DRAM memory for ESP (electronic shock protection). Both variants are pin-compatible and have low standby currents (10 μA maximum).
Toshiba says that the new devices will significantly simplify the implementation of home and vehicle audio systems by reducing component count and eliminating the overhead on system processors. Using the devices, designers can quickly implement a wide variety of functions including CD_DA play mode (with CD-text), compressed audio playback, ISO9660 disk analysis and control, audio playback and CD-ROM modes for data transfer. Digital filters, equalisation and dynamic range control, and sound field controls can also be provided without the need for additional components.
Dedicated CD functions include digital servo processor with integrated RF amplifier and a DAC. All of the devices offer 4-bit parallel interface and a 4-line serial interface for direct connection to a microcontroller. Serial, digital audio and analog interfaces - including one I²S input, three I²S outputs and an SPDIF connection - provide design flexibility for audio input and output.
Further reading:
Memory shortage 2026: Engineering implications for South Africa
DSP, Micros & Memory
[Sponsored] Addressing this challenge requires system-level thinking and adoption with McKinsey Electronics providing the engineering and sourcing framework required to maintain system resilience despite ongoing global constraints.
Read more...
Cost-effective microcontroller series
Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...
Battery-friendly Thread and BLE solution
iCorp Technologies
DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.
Read more...
Next generation HMI processing platform
Future Electronics
DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.
Read more...
Low-power SoC for IoT designs
iCorp Technologies
DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.
Read more...
Chip for high-density power
Future Electronics
DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.
Read more...
The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.
Read more...
GigaDevice expands GD25UF Series density
NuVision Electronics
DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.
Read more...
ARINC 429 line driver evaluation board
ASIC Design Services
DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.
Read more...
Highly integrated 24-channel mixed signal IC
EBV Electrolink
DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.
Read more...
printer friendly version