mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Cylindrical thick film resistors also suitable for high frequencies
8 March 2006, Manufacturing / Production Technology, Hardware & Services

The HTS/HTE high voltage resistor series from Arcol is a range of cylindrical thick film leaded resistors that feature a non-inductive element, coated to resist high humidity.

They are designed for applications such as voltage dividing, medical and measuring equipment, electrostatic and current-limiting devices, where high stability and high ohmic values are required.

With both low temperature and voltage co-efficients, the values range from 200 Ω to 10 GΩ. With 9 W to 17 W sizes and maximum supporting element voltages to 48 kV, this non-inductive range is well suited to high frequency applications.

Resistance tolerances are available from 1,0% to 10% (TCR: 20 PPM/°C to 150 PPM/°C).


Credit(s)
Supplied By: Electrocomp
Tel: +27 11 458 9000
Fax: +27 11 458 9034/5
Email: andrew@electrocomp.co.za
www: www.electrocomp.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • GNSS boards for dead-reckoning
    28 August 2019, Electrocomp, Telecoms, Datacoms, Wireless, IoT
    The Locosys RTK-4671-SHDR/MHDR is a high-precision GNSS RTK (global navigation satellite system real-time kinematics) solution targeting the smart driving and lane-level navigation markets. The newly ...
  • Rugged PFC capacitors
    28 August 2019, Electrocomp, Passive Components
    TDK’s DeltaCap X Black Premium is a new series of Epcos MKD capacitors for power factor correction (PFC). With rated voltages of between 440 V a.c. and 850 V a.c., the capacitors with an internal delta ...
  • Hybrid surface mounters
    28 August 2019, Zetech, Manufacturing / Production Technology, Hardware & Services
    Yamaha’s S10 and S20 i-Pulse 3D hybrid surface mounters, featuring enhanced support for MIDs (moulded interconnect devices), were developed under the concept of a single-unit manufacturing centre designed ...
  • Dual-syringe dispenser
    28 August 2019, Test & Rework Solutions, Manufacturing / Production Technology, Hardware & Services
    Techcon announced the release of its new 50 ml dual-syringe dispenser designed for hassle-free dispensing of 50 ml dual syringes. The system can accommodate conveniently packaged 50 ml side-by-side ...
  • Power inductors for LED headlights
    28 August 2019, Electrocomp, Passive Components
    TDK has expanded its lineup of metal core power inductors with the new SPM-VT series that is designed especially for the high thermal and current demands of automotive LED headlights. These wire-wound ...
  • The only constant is change
    31 July 2019, Microtronix Manufacturing, Manufacturing / Production Technology, Hardware & Services
    Blatant tender rigging and wholesale corruption poses one of the biggest threats to us achieving arguably the single most important and critical requirement in the revival and rejuvenation of our country’s prospects through job creation.
  • All in space is not rocket science
    31 July 2019, Elmatica, Manufacturing / Production Technology, Hardware & Services
    Elmatica, a Norwegian printed circuit board (PCB) broker that established an office in South Africa last year, has assisted a newcomer to the space satellite scene to put its satellites into space.
  • Ferrite magnetic design tool
    26 June 2019, Electrocomp, Passive Components
    The MDT software from TDK allows application-related parameters to be calculated for all available Epcos ferrite cores and/or materials. It provides access to digitalised material data including their ...
  • N-channel enhancement mode FET
    26 June 2019, Electrocomp, Power Electronics / Power Management
    Diotec Semiconductor’s 2N7002 is a widely used small-signal MOSFET in SOT-23 package. With an RDS(on) of maximum 2 Ω, the component offers a lower on-state resistance than the common industry standard. ...
  • Laminates for 5G active antenna arrays
    31 July 2019, RF Design, Manufacturing / Production Technology, Hardware & Services
    Rogers Corporation has introduced UL 94 V-0 antenna-grade laminates manufactured with standard profile electro-deposited copper foil to meet present and future performance requirements in active antenna ...
  • Benchtop soldering robot
    31 July 2019, Testerion, Manufacturing / Production Technology, Hardware & Services
    Weller’s new WTBR 1000 benchtop robot aims to synergise precision, reliability and productivity of soldering tasks. It is equipped with Weller‘s high-performance ‘Technology Line’ soldering tools, ensuring ...
  • New 3D detector for X-ray system
    31 July 2019, MyKay Tronics, Manufacturing / Production Technology, Hardware & Services
    The X Line 3D Series 400, an inline X-ray system from Goepel Electronic, has a new detector option for high-resolution 3D X-ray inspection of electronic assemblies. The MultiAngle Detector 3 combines ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.