Single-chip multimedia power-management device
22 March 2006
Power Electronics / Power Management
STMicroelectronics' compact single-chip power-management device, the STw4810, is designed as a partner for any multimedia application processor engine (APE), including ST's STn881x Nomadik processors, which are used in multimedia portable products such as mobile phones and PDAs. In addition to multiple DC-DC converters and programmable regulators, the chip also integrates a complete USB On-The-Go and full support for popular memory-card interfaces, plus processor-supply monitoring and Reset control.
With its high level of integration, the STw4810 is able to minimise component costs and board-area requirements, and to simplify PCB design. Previous solutions have required several discrete chips and other components to achieve a similar level of functionality, but at higher cost and with lower reliability, says the manufacturer.
The device combines a broad range of analog and mixed-signal functions in a very small 4,6 x 4,6 mm VFBGA84 (very fine ball grid array) or 6 x 6 mm TFBGA84 (thin flat ball grid array) package. The STw4810 includes two independent DC-DC step-down converters, providing 1 to 1,5 V at up to 600 mA for the core supply, and 1,8 V at 600 mA for I/O functions and general-purpose use. Three low-dropout programmable regulators supply power for auxiliary devices and peripherals.
The STw4810 also includes processor supply monitoring and Reset functions, and two I²C control interfaces. Typical applications for the new device are cellphones, portable multimedia terminals, GPS products, PDAs, cameras, and gaming platforms, plus single-cell Li-ion battery powered products.
Further reading:
4 kW e-mobility DC-DC converter
Brabek
Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.
Read more...
Aluminium case upgrade boosts performance
Vepac Electronics
Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.
Read more...
Extending the range of power converters
RS South Africa
Power Electronics / Power Management
Power Integrations recently announced a breakthrough in flyback topology extending the power range of flyback converters to 440 W - well beyond the limits that traditionally required more complex resonant and LLC topologies.
Read more...
Power-dense modules operate up to 115 V DC
Brabek
Power Electronics / Power Management
The RPMVH-0.5 series of cost-effective, non-isolated buck regulator modules from RECOM delivers 0,5A of output at fully regulated voltages up to 24 V DC.
Read more...
Finding value for money with your IoT battery
Uniross Batteries
Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.
Read more...
Powering the IoT
Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...
The move to DC infrastructure
IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...
Power inductor for automotive applications
Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...
High-performance DC-DC converter
Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...
DC-DC converters for next-generation IoT
iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...
printer friendly version