The ADC08/10/128Sxx2 are nine new low-power, CMOS ADC integrated circuits from National Semiconductor with guaranteed performance over three speed ranges.
These converters are pin- and function-compatible to each other and are based on successive approximation register architecture with an internal track-and-hold circuit. They can be configured to accept up to eight input signals at inputs IN0 through IN7. The output serial data is straight binary and is compatible with several standards, such as SPI, QSPI, Microwire, and many common DSP serial interfaces.
These converters can be operated with independent analog and digital supplies. The analog supply (VA) can range from +2,7 to +5,25 V, and the digital supply (VD) from +2,7 to VA.
National's Signal Path Designer tool offers an intuitive, step-by-step guide to balance the resolution, speed and power consumption of a performance-matched ADC with the ideal filters, passive components and amplifier to create an ADC/amplifier circuit with optimal performance. The tool also provides filter simulations for both ideal and device models for comparison purposes. To see the tool create an optimised 12-bit, 1 MSPS signal path, see http://webench.national.com/signalpathdemo.
The key features of these devices include: eight input channels; independent analog and digital supplies; SPI/QSPI/Microwire/DSP compatible; clock frequency: 0,8-3,2 MHz; TSSOP-16 package; -40-105°C range.
For more information contact EBV Electrolink, +27 (0)21 402 1940.
Ultra-low power MEMS accelerometer Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.
Read more...Versatile range of camera modules EBV Electrolink
Opto-Electronics
The CAM-66GY pro-modules from ST are a full range of sample camera modules made for a seamless evaluation and integration of the VD66GY 1,5-megapixel colour image sensor.
Read more...BT Audio 4 Click board Dizzy Enterprises
Analogue, Mixed Signal, LSI
The BT Audio 4 Click board from MIKROE provides high-quality wireless audio streaming and data comms over Bluetooth.
Read more...Precision MEMS IMU modules Altron Arrow
Analogue, Mixed Signal, LSI
The ADIS16575/ADIS16576/ADIS16577 from Analog Devices are precision, MEMS IMUs that includes a triaxial gyroscope and a triaxial accelerometer.
Read more...Elevate your motor control designs EBV Electrolink
DSP, Micros & Memory
Built on an Arm Cortex-M33 core running up to 180 MHz, the MCX A34 family combines high-performance math acceleration and advanced motor control subsystems to unlock efficient motor drive solutions.
Read more...MEMS with embedded AI processing Altron Arrow
Analogue, Mixed Signal, LSI
STMicroelectronics has announced an inertial measurement unit that combines sensors tuned for activity tracking and high-g impact measurement into a single, space-saving package.
Read more...High-performance IMU RS South Africa
Analogue, Mixed Signal, LSI
TDK Corporation has announced availability of the new InvenSense SmartMotion ICM-536xx family of high-performance 6-axis IMUs.
Read more...MCU for noisy environments EBV Electrolink
DSP, Micros & Memory
The MCX?E24X is a high-performance microcontroller family from NXP, engineered for industrial, automotive-like, and energy-focused environments.
Read more...High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...Chip provides concurrent dual connectivity EBV Electrolink
Telecoms, Datacoms, Wireless, IoT
The IW693 from NXP is a 2x2 dual-band, highly integrated device that provides concurrent dual Wi-Fi 6E + Wi-Fi 6 and Bluetooth connectivity, supporting four different modes.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version