4U CompactPCI system for horizontal board assembly
14 June 2006Enclosures, Racks, Cabinets & Panel Products
Schroff has extended its range of CompactPCI plug-in systems for horizontal board assembly.
Apart from the systems in 1, 2 and 3U there is now a 4U system. These space-saving systems are particularly suitable for applications in telecom, test and measurement technology and automation sectors.
The CompactPCI system contains a continuous monolithic backplane for 8 x 6 U standard CompactPCI boards with an integrated, 3U wide, area for the power backplane. There are four connection possibilities on the power backplane, two are designated for the installation of 19" hotswappable CompactPCI power supplies, which can be operated either parallel or redundantly; if required two additional power supplies can be fitted. Alternatively, the area below the power supplies can be used for the assembly of further components, such as hard disks, etc.
In a 4U system there is room for eight horizontal 160 mm deep boards. The system slot is located at the bottom left, which allows it to use double width (8 HP) CPUs. Additionally, there is space in the rear area for horizontal 80 mm deep rear I/O boards with IEEE guide rails inclusive of ESD clips. On the left side of the system there is an integrated hotswappable cooling unit with four low-noise fans. The chassis is perforated to give a 75% open area to ensure extremely good air flow for cooling. As an option, three further fans can be installed.
The 4U systems with horizontal board assembly save not only on costs, but also 3U of system assembly height. All CompactPCI plug-in systems of this series are powder coated black (RAL 9005).
Clearing the Static: ESD containers and packaging Actum
Circuit & System Protection Vacuum forming ESD
Electronic components can be damaged by electrostatic discharges. To protect against such damage, electronic assembly parts are often transported or stored in vacuum formed component ...
Read more...Antistatic vinyl flooring Actum
Manufacturing / Production Technology, Hardware & Services
Vinyl is an affordable, antistatic tile or sheet with a life-span greater than 10 years and installed as a permanent electrostatic discharge floor.
Read more...Electrostatic discharge chairs Actum
Circuit & System Protection
An ESD chair forms an integral part of grounding within the electrostatic discharge protected area to prevent potential damage to products.
Read more...Conductive ESD footwear Actum
Circuit & System Protection
Conductive ESD footwear is used in conjunction with other grounding devices, such as a wrist strap, cord, and ESD surface mats, to provide a continuous path to ground.
Read more...IP66 and IP67 Node & Hub enclosures Vepac Electronics
Enclosures, Racks, Cabinets & Panel Products
The idea behind Node & Hub is simple: enclosures should not be an afterthought. They are the backbone of every smart system protecting, mounting, and connecting the technology that makes the modern world tick.
Read more...Clearing the Static: The importance of cleaning in ESD control Actum
Circuit & System Protection
To prevent Electrostatic Discharge (ESD) damage to sensitive electronic assemblies and components, all production, handling, packaging, and storage must take place in an ESD-protected environment.
Read more...Clearing the Static: Staying grounded Actum
Circuit & System Protection
To maintain reliable electrostatic discharge control, regular testing and accurate measurement are essential, with grounding products and ESD testing equipment being vital.
Read more...Smart track busway for scalable power delivery RS South Africa
Enclosures, Racks, Cabinets & Panel Products
The latest generation Legrand Data Center Track Busway system combines mechanical safety, smart diagnostics, material efficiency, and modular flexibility to provide a dependable platform for optimised power distribution.
Read more...Cabinets for industrial applications Vepac Electronics
Enclosures, Racks, Cabinets & Panel Products
Verotec’s VERAK cabinets addresses the most stringent enclosure requirements providing both IP65 environmental protection and EMC screening.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version