Low-profile high-current inductors
12 July 2006
Passive Components
Vishay Intertechnology is extending its IHLP family of low-profile, high-current inductors with new devices in the 2525-size footprint offering inductance values from 10 μH down to 0,56 μH.
Claimed to have the lowest DCR mH for their respective package sizes, the new IHLP inductors serve as high-performing, space- and power-saving solutions for voltage regulator module and DC-DC converter applications, high-current power supplies and point of load converters, distributed power systems, and FPGAs.
The IHLP2525EZ01 inductors measure 6,47 x 6,86 mm with a maximum height of 5,0 mm. They occupy the standard 2525 footprint shared by lower-profile IHLP devices while providing higher rated current and lower DCR values. The devices are specified for saturation currents ranging from 4,5 A to 12 A, typical DCR values ranging from 3,4 mΩ to 67,9 mΩ, and maximum DCR values ranging from 3,6 mΩ to 71,3 mΩ. Standard inductance tolerance is ±20%.
The devices handle high transient current spikes without hard saturation and operate at a frequency under 1 MHz. They are packaged in an RoHS-compliant shielded, composite construction that reduces buzz noise to ultra-low levels. They are specified for a -55 to +125°C with high resistance to thermal shock, moisture, mechanical shock, and vibration.
www.vishay.com
Further reading:
PCB connectors for power systems
Phoenix Contact
Passive Components
With the new PC 6 PCB connectors with screw connection, Phoenix Contact’s classic connection technology is available with enhanced touch protection for the new pin connector pattern.
Read more...
Polymer caps with very high ripple current capability
RS South Africa
Passive Components
TDK Corporation has released the B40910 series of hybrid polymer capacitors, which can handle up to 4,6 A at 100 kHz and 125°C.
Read more...
SPE connector range
Phoenix Contact
Passive Components
Single Pair Ethernet (SPE) is a communication technology that realises Industry 4.0 and IIoT applications, and Phoenix Contact’s Combicon range are ideal for SPE connections.
Read more...
TDK expands MLCC series
RS South Africa
Passive Components
TDK Corporation has expanded its CGA series of multilayer ceramic capacitors, currently being the highest capacitance in 100 V products for automotive applications.
Read more...
Inductor supports temperatures up to 150°C
RS South Africa
Passive Components
TDK has launched a highly durable inductor for automotive A2B applications that supports a wide temperature range of -55 up to 150°C.
Read more...
Long-range passive infrared motion sensor
Future Electronics
Passive Components
Panasonic Industry (PaPIRs) recently introduced he world’s most compact long-range passive infrared motion sensor, for installation heights of up to 15 metres.
Read more...
Isolated solid state relay
Altron Arrow
Passive Components
The ISO808, ISO808-1 (PowerSO-36) and ISO808Q, ISO808Q-1 (TFQFPN32) are galvanic isolated eight-channel drivers featuring a low supply current.
Read more...
Low-profile power inductors
RS South Africa
Passive Components
TDK Corporation has announced the introduction of its new PLEA85 series of high-efficiency power inductors developed for battery-powered wearables and other devices.
Read more...
Miniature capacitor for automotive applications
Avnet Abacus
Passive Components
Murata has released its LLC series of multi-layer ceramic capacitors for automotive applications, that feature a reversed termination for low ESL.
Read more...
Sealed tantalum capacitors
Electrocomp
Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.
Read more...