Two-part PCB spring-loaded terminal
9 August 2006
Interconnection
A PCB terminal with a spring-loaded connection has the advantage that contact to the printed circuit board (PCB) can be established quickly and economically. Wieland Electric has designed its new PCB terminal type 8520 with this in mind. The main areas of use for this type of PCB terminal are in applications where high volumes require an efficient and cost-effective operation.
System features include: no screw fixing; minimised wiring time; consistency of clamping force; resistant to vibrations and shocks; and it is maintenance free.
Several versions of the Type 8520 can service a variety of applications. They are available as a two-part header terminal connector and as a soldered design with both straight and angled soldering pins. The rated cross section is 0,5 mm² for single core. The conductor can therefore be plugged in easily without having to operate the header clamping spring as part of the same operation. The pitch is 3,5 mm (7,00 mm on request). The pole numbers range from 2 to 16 poles.
Further reading:
Blade terminals deliver greater power density
Spectrum Concepts
Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.
Read more...
What’s the big deal with open pin fields?
Spectrum Concepts
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...
Hirose Electric’s push-on bayonet lock connectors
Avnet Abacus
Interconnection
Hirose Electric’s HR22K Series is a compact, waterproof, and oil-resistant connector designed for demanding industrial environments.
Read more...
New connector for Push-X technology
Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm
2.
Read more...
Test cable designed for maximum ruggedness
Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...
Safe connection under load
Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
Read more...
Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.
Read more...
Connectors for energy storage systems
Phoenix Contact
Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.
Read more...
What’s the big deal with open pin fields?
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...
mBend cable assemblies
Conical Technologies
Interconnection
The mBend cable assemblies from Anoison are designed to meet the growing demand for low-profile coaxial connections in applications where space is limited, and precise bending is necessary right next to the connectors.
Read more...
printer friendly version