Catalyst Semiconductor has expanded its product lines to include a new family of I/O bus expanders. The first two devices in the family, the CAT9554 and CAT9554A, provide a simple and cost-effective method to address eight I²C or SMBus I/O ports. These devices help designers balance system performance, processor, and board costs for sensor, control, and LED applications in white goods, digital cameras, cellphones, PDAs, routers, hubs and servers.
The CAT9554 and CAT9554A consist of eight ports, which power up as inputs and can be configured as an input or output by writing to a register. An internal power-on reset in both devices eliminates glitches on power-up. Each I/O port is 5 V input tolerant, with a high current I/O drive sink of up to 25 mA and an I/O source of up to 10 mA, maximum. Additionally, each I/O port is compatible with logic thresholds of 2,5 V, 3,3 V and 5 V. The 8 I/O pins default to inputs at power-up.
The devices operate from 2,3 V to 5,5 V and over a -40 to 85°C temperature range. They come in 16-pin SOIC, TSSOP and 16-pad TQFN packages.
High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...Single-channel software configurable I/O Altron Arrow
Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.
Read more...Current-sense amplifier with PWM rejection Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.
Read more...Combining a LPF and ADC driver for a 20 Vp-p signal Altron Arrow
Analogue, Mixed Signal, LSI
A mixed-signal ADC driver circuit’s optimum performance depends on multiple variables: the driver’s settling time, the RC filter’s time constant, driving impedance, and the ADC sampling capacitor’s kickback current, all interact during acquisition time and contribute towards sampling errors.
Read more...Pressure sensor with NextNav certification EBV Electrolink
Analogue, Mixed Signal, LSI
STMicroelectronics’ LPS22DF pressure sensor has received a NextNav certification, which guarantees performance and reliability for geolocation and other types of applications.
Read more...Multi-zone distance sensor with 90° field of view Avnet Silica
Analogue, Mixed Signal, LSI
STMicroelectronics has revealed a new FlightSense multi-zone distance sensor, with 90° field of view, to bring lifelike situational awareness to applications like home automation, computers, robots, and smart equipment.
Read more...Six-axis IMU with Qvar sensing channel Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV16X from STMicroelectronics is a high-performance, low-power six-axis IMU, featuring a three-axis digital accelerometer and a three-axis digital gyroscope.
Read more...Bidirectional current-sense amplifier with PWM RS South Africa
Analogue, Mixed Signal, LSI
The MAX49925 from Analogue Devices is a bidirectional current-sense amplifier (CSA) with an input common-mode range that extends from -40 to 76 V, making it suitable for 48 V HEV applications where there are large automotive transients.
printer friendly version