DSP, Micros & Memory


More memory for small CAN-enabled PICs

20 September 2006 DSP, Micros & Memory

Microchip's new PIC18F4685 family of 8-bit microcontrollers is billed as having the largest amount of program memory available on a PIC18 microcontroller with an onboard ECAN module for CAN connectivity. The low-power 28- and 44-pin controller area network (CAN) microcontrollers, with 80 or 96 KB of Flash and integrated EEPROM, are suited for a wide range of automotive and industrial applications. Microchip's ECAN module is said to be an easy-to-use scalable CAN 2.0B solution with the ability to switch between standard CAN operations and FIFO mode. With the required industry-standard CAN protocol software growing in size, the available code space for the actual application is reducing. With the PIC18F4685, Microchip has thus increased the memory for PIC18 CAN applications, offering a migration path from existing 32 and 64 KB devices. The PIC18F4685/4682 come in 44-pin TQFP and 40-pin PDIP packages, and the PIC18F2685/2682 in 28-pin SOIC and PDIP packages.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Easy installation panel mount assembly
Future Electronics Enclosures, Racks, Cabinets & Panel Products
NKK’s new easy installation Panel Mount Assembly (the BYB201-470) consists of a PCB, resistor, connector, and a straight PC adaptor.

Read more...
Microchip enhances digital signal controller lineup
Future Electronics DSP, Micros & Memory
Microchip Technology has added the dsPIC33AK512MPS512 and dsPIC33AK512MC510 Digital Signal Controller families to its dsPIC33A DSC product line.

Read more...
Ultra-low-power wireless module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STM32WBA5MMG from STMicroelectronics is an ultra-low-power, small form factor, certified 2,4 GHz wireless module that supports Bluetooth LE, Zigbee 3.0, OpenThread, and IEEE 802.15.4 proprietary protocols.

Read more...
MCX C Series development board
Avnet Silica DSP, Micros & Memory
The FRDM-MCXC444 is a compact and scalable development board for rapid prototyping of MCX C444 MCU from NXP Semiconductors.

Read more...
16-channel multicell battery monitor
Altron Arrow Power Electronics / Power Management
The ADBMS6830B is a multicell battery stack monitor that measures up to 16 series-connected battery cells with a lifetime total measurement error of less than 2 mV.

Read more...
Bringing Bluetooth Channel Sounding to automotive and beyond with KW47
Altron Arrow Telecoms, Datacoms, Wireless, IoT
NXP’s new Channel Sounding-certified KW47 and MCX W72 wireless MCUs are set to help automakers with distance measurement, bringing an additional ranging solution for car access and autonomous systems, and will be utilised across a broader spectrum of applications.

Read more...
Redefining entry-level MCUs
NuVision Electronics DSP, Micros & Memory
The company positions the GD32C231 series as a ‘high-performance entry-level’ solution designed to offer more competitive options for multiple applications.

Read more...
Wi-Fi 6 and Bluetooth LE coprocessor module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The ST67W611M1 from STMicroelectronics boasts an all-in-one design which, together with its capabilities, contribute to making it an attractive choice for IoT edge devices requiring a single-chip solution.

Read more...
Wi-Fi 6 plus Bluetooth LE SoC
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Silicon Labs’ SiWx917M SoC is the company’s lowest power Wi-Fi 6 SoC, ideal for ultra-low power IoT wireless devices using Wi-Fi, Bluetooth, Matter, and IP networking for secure cloud connectivity.

Read more...
Low-profile tantalum chip capacitors
Electrocomp Passive Components
These general-purpose tantalum capacitors from Kyocera AVX are available in multiple case sizes with low profile options.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved