Interconnection


High-speed interconnecting cables

4 October 2006 Interconnection

Samtec's expanded Data Rate Cable assembly systems provide flexible high-speed cable-to-board solutions on 0,5 mm and 0,635 mm pitch (HBCD Series & MICD/SQCD Series) for single-ended applications using Samtec EyeSpeed micro coax cable.

MICD/SQCD Series cables are designed to mate with Samtec's Q Series high-speed strip products and include an internal ground plane. It mates with the mixed technology footprint MIS/MIT Series Q Strips with the ground plane through-hole soldered. The SQCD Series mates with Samtec's fully surface mount QTS/QSS Series Q Strips. Performance is typically up to 1,2 Gbps for 300 mm cable lengths and 450 MHz at one metre cable lengths.

Samtec HBCD Data Rate cables mate with Samtec's BTH/BSH Series micro strips on 0,5 mm pitch. These connectors are similar to Q Strips, but without the internal ground plane. Typical performance is 2,4 Gbps for 300 mm cables and 560 MHz for one metre long cables. Applications include test point probes and emulation connections. 100-pin designs will mate with Agilent Logic Analyzer test points.

For more information contact Quentin van den Bergh, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Meeting the demands of mmWave with Samtec high-performance RF solutions
Spectrum Concepts Interconnection
[Sponsored] The appetite of modern technology for ever-higher data rates and transmission speeds seems to be insatiable, and this is especially apparent in the drive towards mmWave technologies.

Read more...
Wi-Fi 6 and Bluetooth LE co-processor
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released its ST67W611M1, a low-power Wi-Fi 6 and Bluetooth LE combo co-processor module.

Read more...
Empowering innovation with ST’s AI processors
Altron Arrow AI & ML
Artificial intelligence is no longer just a futuristic concept – it is here, and it is transforming industries at an unprecedented pace.

Read more...
Robust series of vertical-mating battery connectors
Electrocomp Interconnection
KYOCERA AVX has further expanded its industry-leading selection of standard battery connectors with the introduction of the new 9155-900 Series 2,5 mm-pitch vertical-mate battery connectors.

Read more...
1-Wire EEPROM with secure authenticator
Altron Arrow DSP, Micros & Memory
The DS28E54 secure authenticator combines FIPS 202-compliant secure hash algorithm (SHA-3) challenge and response authentication with secured electrically erasable programmable read-only memory.

Read more...
The 6 GHz band radio solution
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Analog Devices’ 16 nm transceiver family offers a highly integrated solution for this new frequency band, featuring low power consumption and high performance.

Read more...
New clock generator family
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Based on Skyworks’ fifth generation DSPLL and MultiSynth technologies, these devices enable any-frequency, any-output clock generation.

Read more...
Dual accelerometers on the same die
Altron Arrow Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.

Read more...
High current and voltage interconnect
Hiconnex Interconnection
The 972 series interconnect from Glenair ensures peak performance for the latest specification requirements in high-current, high-voltage, and high-frequency commercial aircraft applications.

Read more...
M12 panel mount connectors
Communica Interconnection
Binder, a specialist in industrial circular connectors, offers a particularly wide range of M12 panel mount connectors that cover a wide variety of connection types, materials, and fastening solutions.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved