Analogue, Mixed Signal, LSI


Next-generation energy measurement solution launched

7 March 2007 Analogue, Mixed Signal, LSI

Microchip's new MCP3909 energy-measurement IC combines low power consumption with an SPI interface and active power pulse output. As a part of the MCP3909 3-Phase Energy Meter Reference Design, the IC enables designers to rapidly develop new meter designs.

The MCP3909, in 24-pin SSOP package, features two 16-bit delta-sigma ADCs, data access via its SPI interface, and an active power pulse output. This simultaneous data output makes the IC adaptable to a variety of meter requirements. Its very low (0,1% typical) measurement error over a 1000:1 dynamic range is ideal for meter applications requiring high accuracy, while a low supply current of only 4 mA makes it suitable for many single- and three-phase energy meter designs.

The MCP3909 reference design includes three MCP3909 ICs, and separate PIC18F2520 and PIC18F4550 microcontrollers, in a modular design. The PIC18F2520 performs all power calculations in the reference design, while the PIC18F4550 provides a USB interface to desktop software. The software package that comes with the reference design provides the ability to read active and apparent power, as well as RMS current and RMS voltage enables, and also enables meter calibration.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Precise multi-vital sign monitoring
Future Electronics Power Electronics / Power Management
The AS7058 by ams OSRAM is an integrated multi-vital sign monitoring device, which provides a complete photoplethysmogram, electrocardiogram, body impedance sensor, and electrodermal activity sensor.

Read more...
Reducing noise on power supply lines
Future Electronics Circuit & System Protection
Murata has introduced the EMIFIL ESD Series Noise Filters, a breakthrough solution engineered for superior noise suppression and enhanced electrostatic discharge (ESD) protection.

Read more...
Ultra-low power MEMS accelerometer
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.

Read more...
Advanced 3-phase controllers
Future Electronics Power Electronics / Power Management
The STSPIN32G0 by STMicroelectronics is a family of highly integrated system-in-package providing solution suitable for driving three-phase brushless motors.

Read more...
Converting high voltages without a transformer
Altron Arrow Editor's Choice Power Electronics / Power Management
With appropriate power converter ICs, such as the LTC7897 from Analog Devices, many applications can be suitably powered without having to use complex and cost-intensive transformers.

Read more...
MultiVolt series of oscillators
Future Electronics DSP, Micros & Memory
The ECS-3225MVQ from ECS Inc. is a compact, quartz-based MultiVolt oscillator designed for precision timing in automotive, industrial, and portable electronic systems.

Read more...
MCU platform for battery-powered devices
Altron Arrow DSP, Micros & Memory
The MCX W23 is a new dedicated wireless MCU platform from NXP for battery-powered sensing devices.

Read more...
Drive innovation with AURIX TriCore MCUs
Future Electronics DSP, Micros & Memory
Infineon’s AURIX TriCore family balances safety, performance, and energy efficiency to offer a scalable and future-ready portfolio.

Read more...
BT Audio 4 Click board
Dizzy Enterprises Analogue, Mixed Signal, LSI
The BT Audio 4 Click board from MIKROE provides high-quality wireless audio streaming and data comms over Bluetooth.

Read more...
Precision MEMS IMU modules
Altron Arrow Analogue, Mixed Signal, LSI
The ADIS16575/ADIS16576/ADIS16577 from Analog Devices are precision, MEMS IMUs that includes a triaxial gyroscope and a triaxial accelerometer.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved