Mean Well is offering another new product series for LED lighting purposes. The PLN-30 series is a 30 W AC/DC enclosed type switching power supply with active PFC function.
These limited power sources comply with UL 1310 class 2 that under any situation, the output power is less than 100 VA or 5 A. This significantly reduces the hazardous conditions exposed to technicians who perform maintenance of the LED lighting system.
The IP64 enclosure design can protect the electronic components against dust and moisture, making them useful for indoor or outdoor locations.
Thanks to a simplified single stage PFC topology, the required high power factor as well as the class C harmonic level for the lighting industry can be economically achieved. Efficiency of PLN-30 series is as high as 86% and so can operate between -30 to 50°C with only free air convection inside the fully covered plastic enclosure.
Standard functions include short circuit, overload, over voltage, and over temperature protections. Also, the adjustable output voltage and current level enables fine tuning of the PSU to comply with LED characteristics.
Typical applications for these new Class 2 power units include small scale moving signs, back-lighting, LED-based decorative/architectural lighting, LED stage and theatre lighting, and LED electronic displays.
PhotoMOS relays Future Electronics
Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.
Read more...Mouser now shipping onsemi’s image sensors TRX Electronics
Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.
Read more...Adaptive optics’ power solution Altron Arrow
Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.
Read more...Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.
Read more...High-speed lasers RFiber Solutions
Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime
Read more...High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.
Read more...Halo mid-board optical transceiver Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...New generation of Ethernet media converters IOT Electronics
Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.
Read more...PIN photodiode with integrated lens RFiber Solutions
Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.
Read more...RGBIR sensor with I2C interface Electrocomp
Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.
printer friendly version