DC/DC converter requires no heatsinking

27 June 2007 Power Electronics / Power Management

Providing designs engineers with a point-of-load device for a variety of applications, BI Technologies offers a fixed 5 V output DC/DC converter. Designated the MS2378, the 2 W converter is packaged in a hybrid SIP configuration and uses a ceramic base and hybrid technology which, according to the manufacturer, eliminates any heatsinking requirements.

The device features a fixed output voltage of 5 V (with a 3,3 V version also available) at up to 400 mA, and an input voltage range of 12 to 32 V d.c. Line regulation is 1% (measured at 16 to 32 V at 400 mA) with load regulation of 1% (at 100 mA to 400 mA). Operating temperature is -10 to +70°C. BI Technologies will also produce devices outside these specifications to meet customer requirements. It measures 25,4 mm long x 12,7 mm high x 5,7 mm thick, with typical lead spacing of 2,5 mm, and can be vertically or horizontally mounted.

Further reading:

NVDC power-path control to 1– 6 cell battery systems
iCorp Technologies Power Electronics / Power Management
SG Micro’s SGM41581 is an I2C-controlled narrow voltage direct charging buck boost charge controller designed to simplify robust power delivery in systems that must seamlessly operate from an adapter input or a battery pack.

Read more...

---

Precise, adaptive battery health-monitoring
RS South Africa Power Electronics / Power Management
New fuel gauge solution from Nordic delivers State-of-Health reporting, adaptive battery modelling, and seamless fleet observability via nRF Cloud.

Read more...

---

Compact 6 A automotive buck converter
Altron Arrow Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.

Read more...

---

The new role of UPS technology in high-precision automation
Omron Electronics Power Electronics / Power Management
OMRON’s BU_2SW and BU_2RWL series UPS systems are engineered to offer a robust, online type power architecture designed to safeguard sensitive AC powered systems across a wide range of industries.

Read more...

---

Rugged railway-grade DC-DC power modules
iCorp Technologies Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.

Read more...

---

Four-quadrant regenerative grid simulator
Conical Technologies Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.

Read more...

---

90 W PSU with 150% boost capability
Brabek Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.

Read more...

---

Standalone USB PD controller
Future Electronics Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.

Read more...

---

Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...

---

MIL-Spec DC-DC power converters
Vepac Electronics Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.

Read more...

---