|
|
Connect and protect a higher powered solution
27 June 2007, Power Electronics / Power Management
The DF11 and DF12 power entry modules with circuit breaker from Schurter are ideal for the protection of high transient loads where fuse-links cannot be used in power entry modules due to higher power dissipation.
The DF11 consists of an IEC60320 inlet C14 and a TA45 circuit breaker for equipment. The DF12 additionally contains a line-filter for rated currents of 1, 2, 4, 6 and 10 A with a standard or medical version. The surrounding filter case improves its shielding characteristics.
Many different TA45 circuit breaker configurations are possible to meet individual design needs. Under-voltage protection or alternatively, a remote trip release can be incorporated, and illuminated switch versions support optimised status indication. The design enables the mounting in mobile as well as stationary applications where an on/off switch as well as an over-current protection is required. The recessed rocker switch prevents unintended actuation, and the surrounding flange provides mechanical stability.
Schurter's power entry modules save assembly time and costs by being pre-wired, so that only three spade terminals are required for connection. Screw-in and snap-in versions for panel thickness of 1-8 mm are available.
The DF11 and DF12 modules are ideal for high-quality power supplies, and the 2-pole circuit version is especially suited to telecom base station modules, high-end computers or high capacity medical applications. The DF11 and DF12 are approved to 10 A, 125/250 V a.c., 50/60 Hz according to ENEC, UL and CSA. They are suitable for use in equipment according to IEC/EN 60950. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Rugged DC-DC converters
28 August 2019, Vepac Electronics, Power Electronics / Power Management
XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
- X-capacitor discharge ICs
25 September 2019, MB Silicon Systems, Power Electronics / Power Management
Power Integrations announced CAPZero-3, the latest generation of the company’s energy-saving X-capacitor discharge ICs. Two-terminal CAPZero-3 ICs enable designers to meet IEC60335 safety approvals for ...
- Controllers for new PoE standard
25 September 2019, EBV Electrolink, Power Electronics / Power Management
ON Semiconductor is supporting the IEEE 802.3bt standard with a growing portfolio of compliant products and technologies. Using the new IEEE 802.3bt standard, Power over Ethernet (PoE) can be used to ...
- Battery protectors with integrated fuel gauges
25 September 2019, CST Electronics, Power Electronics / Power Management
Designers concerned about battery safety now have access to an advanced battery protector with integrated fuel gauges from Maxim Integrated Products. The newest 1-cell, pack-side ICs in this portfolio ...
- Flexible digital power-factor controller
25 September 2019, Altron Arrow, Power Electronics / Power Management
Combining the flexibility of digital power with the responsiveness of analog algorithms, STMicroelectronics’ STNRGPF12 dual-channel interleaved boost-PFC (power factor correction) controller is easily ...
- Isolated industrial drive switches
25 September 2019, NuVision Electronics, Power Electronics / Power Management
Silicon Labs has introduced a family of compact, robust isolated smart switches designed to drive any load, even in the harshest industrial environments. The new Si834x isolated switches are ideal for ...
- High-voltage rack-mount PSUs
25 September 2019, Vepac Electronics, Power Electronics / Power Management
XP Glassman Power has introduced a series of rack-mount, high-voltage DC power supplies (PSU) able to supply up to 60 kV. Aimed at laboratories and OEMs, the EY series of 1200 W power supplies feature ...
- Power controller for smart home appliances
28 August 2019, RF Design, Power Electronics / Power Management
Qorvo has introduced a new intelligent power control solution for reducing energy consumption, bulk, weight and noise in smart home appliances, AC-powered fans and compressors. This mixed-signal system-in-package ...
- UPS battery configuration made easy
28 August 2019, Forbatt SA, Power Electronics / Power Management
Determining the UPS (uninterruptible power supply) battery configuration using a formula can be quite complicated and, since many users are not very familiar with it, a more simplified method can be used ...
- Bidirectional laboratory power supply
28 August 2019, Vepac Electronics, Power Electronics / Power Management
EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
- 3 Watt DC-DC converters
28 August 2019, Avnet South Africa, Power Electronics / Power Management
Aimtec has introduced three new series of switching regulators – the AMSRB1-78JZ, AMSRL1-78JZ and AMSRL-78JZ – all meeting the EN62368 standard and suitable for IoT (Internet of Things) applications.
The ...
- Isolated PFC module
28 August 2019, Conical Technologies, Power Electronics / Power Management
SynQor has added a new isolated PFC (power factor correction) module to its AeroQor range of products for the airborne electronics market. Featuring highly efficient active power factor correction, the ...
|
|
