Analogue, Mixed Signal, LSI


Stereo amplifier creates 3D audio effects

11 July 2007 Analogue, Mixed Signal, LSI

STMicroelectronics has developed a compact audio power amplifier chip, intended for portable audio products, which creates 3D audio effects in the stereo speaker outputs to add impact and a surround-sound feel to MP3 and video files. The TS4997 can deliver 1,2 W per channel of continuous average output power into 8 Ω loads, from a supply range between 2,7 and 5,5 V, while its high-efficiency design and ultra-low standby power will help extend battery life. No signal pre-processing is required, and no external components need to be added to the compact package. A two-pin digital interface controls the 3D effect through independent gain adjustments for each audio channel, while additional left and right channel Standby mode pins allow the supply current to be cut to less than 10 nA per channel. Signal-to-noise ratio (SNR) is 106 dB(A), and pop and click interference is suppressed. The TS4997 is available in a QFN16 4 x 4 mm package, with 0,65 mm pad pitch.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Smallest automotive maXTouch controllers
29 July 2020, Altron Arrow, Avnet South Africa , DSP, Micros & Memory
To help enhance and ease today’s driving experience, automotive manufacturers are implementing additional touch displays beyond the centre infotainment display (CID). Supporting the application of these ...

Read more...
MOSFET half-bridge power stage
30 June 2020, Altron Arrow , Power Electronics / Power Management
Vishay Intertechnology introduced a new 30 V n-channel MOSFET half-bridge power stage that combines a high-side TrenchFET MOSFET and low-side SkyFET MOSFET with integrated Schottky diode in one compact ...

Read more...
Cypress ships one billionth USB-C device
30 June 2020, Altron Arrow , News
Cypress, an Infineon Technologies company, announced that in less than five years, the company has achieved a landmark milestone by shipping its one billionth USB-C device. As the leading provider of ...

Read more...
18 V synchronous buck converters
30 June 2020, Altron Arrow , Power Electronics / Power Management
Suitable for consumer and industrial applications, Diodes Incorporated announced the AP62xxx family of high-efficiency synchronous step-down DC-DC converters including the AP62250 (2,5 A), AP62300 (3 A), ...

Read more...
Robust temperature sensor for E-mobility
30 June 2020, Electrocomp , Analogue, Mixed Signal, LSI
The new B58703M1103A* temperature sensor is specially developed for demanding E-mobility applications, which call for high long-term stability. The NTC sensor is designed for a temperature range of -40°C ...

Read more...
MOSFET half-bridge power stage
30 June 2020, Altron Arrow , Power Electronics / Power Management
Vishay Intertechnology introduced a new 30 V n-channel MOSFET half-bridge power stage that combines a high-side TrenchFET MOSFET and low-side SkyFET MOSFET with integrated Schottky diode in one compact ...

Read more...
Video Reel: Microchip’s SAM L11
30 June 2020, Altron Arrow , Multimedia, Videos
This video (www.dataweek.co.za/*jun20-sam) provides a brief overview of Microchip Technology’s SAM L11 comprehensive security solution framework and demos to make implementation of security simple. Microchip’s ...

Read more...
Dual-core wireless MCU
30 June 2020, Altron Arrow , Telecoms, Datacoms, Wireless, IoT
The STM32WBx0 is a dual-core wireless MCU based on an Arm Cortex-M4 core running at 64 MHz (application processor) and an Arm Cortex-M0+ core at 32 MHz (network processor). The STM32WBx0 Value Line ...

Read more...
3 kW TVS diode arrays
30 June 2020, Avnet South Africa , Circuit & System Protection
To ensure critical operations, aviation and space systems rely on digital and logic functionality and circuitry in engine control units, environmental controls, instruments and actuators. Data centres, ...

Read more...
What’s in your healthcare monitor?
29 July 2020, Altron Arrow , Power Electronics / Power Management
System designers of portable and wireless medical monitoring devices used for in-home patient health monitoring purposes face daunting design challenges such as thermally- and space-constrained enclosures, as well as being able to transmit data without interference or interruption.

Read more...