Opto-Electronics


Transmissive optical sensors ideal for automotive market

8 August 2007 Opto-Electronics

Vishay's TCPT1300X01 and TCUT1300X01 transmissive sensors are said to be the industry's first with a Moisture Sensitivity Level rating of 1 (MSL1), which means they have an unlimited floor life. They also meet the AEC Q101 standard, a reliability test qualification procedure for discrete semiconductors published by the Automotive Electronics Council. The new sensors offer a wide operating temperature range of -40°C to +85°C. With a 3 mm gap width, the sensors can be used with a wide variety of materials and allow for looser mechanical tolerances than sensors with smaller gaps, making them ideal for automotive and industrial applications. The TCPT1300X01 is a single channel transmissive sensor with an aperture of 0,3 mm and a gap of 3 mm. The TCUT1300X01 is a dual channel sensor with two apertures of 0,3 mm and a gap of 3 mm. Both sensors have a phototransistor output and operate at a wavelength of 950 nm. Both sensors are RoHS-compliant, free of halogens, and compatible with lead (Pb)-free soldering.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

EMC limits and levels
Altron Arrow Editor's Choice Circuit & System Protection
As soon as electronics and electrical systems started interfering with each other, the world had to come to some consensus. Considering physics is universal and does not care about what country electrical/electronic products are used in, it should be the same everywhere, right? It is nearly there, but not quite.

Read more...
Industrial time-of-flight proximity sensor
EBV Electrolink Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.

Read more...
Introducing STM32CubeMX2
Altron Arrow Design Automation
STMicroelectronics has launched STM32CubeMX2, a new evolution of its popular configuration and code generation tool for STM32 microcontrollers.

Read more...
Next-gen SPE
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Next-generation 100/1000BASE-T1 Single Pair Ethernet PHYs integrate MACsec security, time sensitive networking, and functional safety.

Read more...
Flexible enclosure lighting solutions
IOT Electronics Opto-Electronics
Phoenix Contact’s range of enclosure lights is designed to provide uniform illumination throughout control cabinets, while offering flexible installation and energy-efficient operation.

Read more...
Industry’s smallest laser firing system IC
Opto-Electronics
Silanna Semiconductor recently announced that its FirePower laser firing system ICs for smaller, more efficient LiDAR and rangefinder applications are available in production quantities.

Read more...
More light, greater efficiency, better growth
Würth Elektronik eiSos Opto-Electronics
Würth Elektronik has expanded its WL-SMDC Horticulture product line with new LEDs with wavelengths of 450, 660, and 730 nm in the 3535 package.

Read more...
Intelligent control boosts tunnel safety
IOT Electronics Opto-Electronics
Intelligent tunnel lighting systems are helping operators by delivering adaptive illumination that enhances both safety and energy efficiency.

Read more...
Case Study: Turning data into insight
Hamamatsu Photonics UK Editor's Choice Opto-Electronics
Hamamatsu Photonics’ InGaAs PIN photodiode detector has proven consistent, reliable, and robust for more than a decade, helping Axetris to deliver stable, repeatable measurements.

Read more...
Ultra-low-power smart metering
EBV Electrolink Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved