mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Multitechnology telecom tester
14 February 2001, Test & Measurement

The Trend auroraTempo can now be equipped to perform monitoring and analysis functions for V5 and/or ISDN protocols. These options are available for the auroraTempo with E1 interfaces (both V5 and ISDN) and T1 interfaces (ISDN only), and will support dual port operation where dual ports are configured. This new capability can be provided independently of, or to complement, the Tempo's complete frame relay functionality.

The inherent power of the auroraTempo allows full bi-directional monitoring of up to four user-selectable channels per interface, simultaneously. Comprehensive realtime decodes are provided for V5.1/5.2 and an extensive range of ISDN protocols in the respective signalling channels. Bearer channel decode support for X.31/X.25 is also provided.

In addition to the monitoring of channel protocols, the auroroTempo provides an exceptional level of physical interface monitoring and reporting. It will display physical alarms and states with error counters, measurement of frame slips and evaluation of Sa7 bit.

With this additional software capability, engineers need only be familiar with one unit when confronted with the mixed technologies that make up modern circuit switched access networks. For troubleshooting that requires audio monitoring, the auroraSonata or auroraDuet testers are suitable companion tools.

Protea Communications & Measurement

(011)786 3647


  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • EXFO launches new category of fibre testing solutions
    26 June 2019, Lambda Test, Test & Measurement
    EXFO has launched what it describes as the first optical fibre multimeter (OFM). Called Optical Xplorer, it aims to make fibre testing simple for all frontline technicians, whether beginner or expert, ...
  • Handheld industrial Ethernet tester
    26 June 2019, Coral-i Solutions , Test & Measurement
    Ideal Networks has launched NaviTEK IE, a handheld network tester designed for commissioning, preventative maintenance and troubleshooting of PROFINET industrial Ethernet networks, plus standard Ethernet ...
  • PCB cleaning diagnostic system
    26 June 2019, Electronic Industry Supplies, Test & Measurement
    The Verinas system from PBT Works is a dedicated piece of AOI (automatic optical inspection) equipment for evaluating remaining flux residues on PBT glass test boards. The system can be used by electronics ...
  • Body-worn EMF monitor
    29 May 2019, Accutronics, Test & Measurement
    For those working with high-intensity electromagnetic fields (EMF), such as in the near field region of radar antennas, broadcast transmitters or cellular base stations, it is vital to wear personal safety ...
  • Optical spectrum analyser
    29 May 2019, Coral-i Solutions , Test & Measurement
    Anritsu announced the sales launch of the new MS9740B spectrum analyser which has been developed for evaluating the output characteristics of optical active devices used by optical communications systems. ...
  • New scan capabilities for EMI receiver
    29 May 2019, Concilium Technologies, Test & Measurement
    Keysight Technologies has added time domain scan (TDS) and real-time scan (RTS) capabilities to the N9048B PXE electromagnetic interference (EMI) receiver, enabling real-time measurements and diagnostics ...
  • Passive intermodulation analyser
    30 April 2019, Actum Electronics, Test & Measurement
    Passive intermodulation (PIM) is one of the main causes of faults in modern networks. PIM can significantly reduce the network quality with regard to range and data transmission. PIM is caused by a number ...
  • Vacuum test fixture
    30 April 2019, Electronic Industry Supplies, Test & Measurement
    With its newly designed vacuum test fixtures, Ingun has simplified mass testing of a small number of PCB (printed circuit board) versions. The vacuum test fixture combines intuitive handling and a robust, ...
  • Optical spectrum analyser
    30 April 2019, Coral-i Solutions , Test & Measurement
    Anritsu announced the sales launch of the new MS9740B spectrum analyser which has been developed for evaluating the output characteristics of optical active devices used by optical communications systems. ...
  • New scan capabilities for EMI receiver
    30 April 2019, Concilium Technologies, Test & Measurement
    Keysight Technologies has added time domain scan (TDS) and real-time scan (RTS) capabilities to the N9048B PXE electromagnetic interference (EMI) receiver, enabling real-time measurements and diagnostics ...
  • Body-worn EMF monitor
    30 April 2019, Accutronics, Test & Measurement
    For those working with high-intensity electromagnetic fields (EMF), such as in the near field region of radar antennas, broadcast transmitters or cellular base stations, it is vital to wear personal safety ...
  • Passive intermodulation analyser
    27 March 2019, Actum Electronics, Test & Measurement
    Passive intermodulation (PIM) is one of the main causes of faults in modern networks. PIM can significantly reduce the network quality with regard to range and data transmission. PIM is caused by a number ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.