mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Soldering station with automatic feed
14 February 2001, Manufacturing / Production Technology, Hardware & Services

Weller's SFA solder station has an automatic solder feed. The solder is fed with a nozzle to the solder joint and the exact distance is assured by using a spring. This guarantees that the solder automatically returns from the hot tip after each soldering process, which prevents flux dropping. A timer determines the exact solder quantity for each solder joint dispensed with a finger switch on the iron handle.

The 50 W iron has a temperature range of 150 to 450°C. It can use solder of 0,8 to 1,5 mm diameter.

The unit complies with all ESD safety requirements.


Credit(s)
Supplied By: Christensen Tools
Tel: +27 11 618 3200
Fax: +27 11 614 2821
Email: info@christensen.co.za
www: www.christensen.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Designing PCBs for Mil Spec
    29 May 2019, Cirtech Electronics, Manufacturing / Production Technology, Hardware & Services
    In the field of electronics, Mil Spec – or Military Specification – has a very clear and understood meaning. It denotes equipment designed and made to exacting standards, in accordance with precise rules ...
  • Continued success for Zetech’s stencils division
    30 April 2019, Zetech, This Week's Editor's Pick, News, Manufacturing / Production Technology, Hardware & Services
    Best known for supplying SMT (surface mount technology) equipment and consumables for printed circuit board assembly for 33 years, Zetech is enjoying success with its more recently established stencils ...
  • How to analyse blind via hole failures
    27 March 2019, This Week's Editor's Pick, Manufacturing / Production Technology, Hardware & Services
    It has become common practice to use blind, filled and stacked vias in many portable electronics products. Experience has shown that this method of interconnection is reliable, provided the fabrication process is well defined and controlled.
  • PCB microsectioning – paying attention to detail
    27 March 2019, Cirtech Electronics, This Week's Editor's Pick, Manufacturing / Production Technology, Hardware & Services
    In our high-tech world, it’s easy to overlook the importance of the humble printed circuit board (PCB). Buried in each electronic gadget or appliance there’s always at least one PCB and each one has ...
  • X-ray dose considerations
    27 March 2019, MyKay Tronics, Manufacturing / Production Technology, Hardware & Services
    The benefits of using X-ray technology in the electronics industry to inspect printed circuit board assemblies are well proven. This article summarises X-ray radiation dose, and the techniques that ...
  • Product development issues explored in new video
    27 March 2019, Manufacturing / Production Technology, Hardware & Services
    Printed circuit broker, Elmatica, recently released a new film about product development, explaining why cooperating with an experienced partner could be a smart move. “We have several times seen the ...
  • Flux management system earns APEX award
    27 March 2019, MyKay Tronics, Manufacturing / Production Technology, Hardware & Services
    BTU International was awarded a 2019 NPI award in the reflow soldering category for its new Aqua Scrub flux management technology. The award was presented to the company during a ceremony that took place ...
  • Solder dross recovery system
    27 March 2019, Electronic Industry Supplies, Manufacturing / Production Technology, Hardware & Services
    Stannol’s Solder Saver is a mechanical device to reduce dross, which occurs as an unavoidable side effect in wave soldering systems. According to its manufacturer, solder consumption can be reduced by ...
  • Water-soluble solder paste
    27 February 2019, Techmet , Manufacturing / Production Technology, Hardware & Services
    Indium has released Indium6.6HF solder paste – a new water-soluble, halogen-free solder paste that is compatible with both tin-lead and lead-free alloys. It is designed to provide enhanced stencil printing ...
  • Affordable soldering station
    27 February 2019, Electronic Industry Supplies, Manufacturing / Production Technology, Hardware & Services
    The Industa 550 soldering station, available from Stannol, is an affordable unit characterised by easy operation and universal fields of application. The temperature is easy to set using a potentiometer, ...
  • Stencil underside cleaning and manual post-cleaning
    27 February 2019, Testerion, Manufacturing / Production Technology, Hardware & Services
    According to experts, between 60 and 70% of all defects and failures during or after the soldering process are attributable to defects in the printing process (Figure 1). In general, these are faulty ...
  • What you need to know about the Hermes standard
    EMP 2019 Electronics Manufacturing & Production Handbook, Manufacturing / Production Technology, Hardware & Services
    Taking advantage of modern TCP/IP communication and XML data format technologies, Hermes is effectively a replacement of the more than 20-year-old SMEMA standard.

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.