Passive Components


Coilformer for UNI Safety Class EJ

19 September 2007 Passive Components

Norwe’s coilformer design features solid press-fit solder-pins to achieve an optimised pinning automation.

Reinforcing ribs to the core stabilise the terminal strips in cases where thicker wires are used, while the choice of using press-fit solder-tags allows wrapping of thick or litz wires. The coilformers are suitable for automatic winding.

The special design allows crossing-free routing of the wires. Due to the design of the terminal strips, being separated from the main flanges, as well as with an optional set of accessories consisting of shroud/insulating bridge, UNI Safety Class EJ requirements are achieved without potting. Additionally, special designs, eg, with asymmetrical partitioning of the winding space, can be realised in a cost-effective and efficient way.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Capacitors for fast-switching semiconductors
30 September 2020, TRX Electronics , Passive Components
KEMET's KC-LINK surface mount capacitors are designed to meet the growing demand for fast switching wide bandgap (WBG) semiconductors that operate at higher voltages, temperatures, and frequencies. These ...

Read more...
High-reliability screening for PPI’s capacitors
30 September 2020, RFiber Solutions , Passive Components
As typical electrical tests may not detect internal flaws such as voids, cracks, delaminations and electrode discontinuities, which can lead to latent and/or catastrophic failures in high-power applications, ...

Read more...
Rugged three-phase AC filter capacitors
30 September 2020, Electrocomp , Passive Components
TDK introduced two new series of EPCOS power capacitors for AC filtering in three-phase delta connection applications. The B32375* series is designed for the low to medium power range and covers a capacitance ...

Read more...
Enclosures for mounting electronic applications
30 September 2020, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue and groove ...

Read more...
Metallised polypropylene film capacitors
30 September 2020, Avnet Abacus , Passive Components
Vishay Intertechnology has introduced a new series of Automotive Grade DC-Link metallised polypropylene film capacitors optimised for high humidity environments. The Vishay Roederstein MKP1848H DC-Link ...

Read more...
Mini air core inductors
29 July 2020, RF Design , Passive Components
Coilcraft has released its latest mini air core inductors, the 1512SP /2712SP Series. Specifications include Q factors up to 100 at 150 MHz; a wide range of standard EIA inductance values from 2,5 to ...

Read more...
Supercapacitors usurping batteries, says IDTechEx
31 August 2020 , Passive Components
A new IDTechEx report shows that supercapacitors have started to replace 10% of lithium-ion batteries and also help to kill lead-acid.

Read more...
Mini air core inductors
31 August 2020, RF Design , Passive Components
Coilcraft has released its latest mini air core inductors, the 1512SP/2712SP Series. Specifications include Q factors up to 100 at 150 MHz; a wide range of standard EIA inductance values from 2,5 to 150 nH ...

Read more...
CeraCharge now available in a small packing unit
30 June 2020, Electrocomp , Passive Components
TDK is presenting a new packing unit for CeraCharge, the world’s first SMD technology solid-state rechargeable battery, in the compact size EIA 1812 (4,4 x 3,0 x 1,1 mm). The packing unit (B73180A0101M199) ...

Read more...
Surface mount resistors and terminations
30 June 2020, RF Design , Passive Components
Smiths Interconnect announced the release of its extended CXH series of surface mount chip resistors and terminations. The CXH series uses a patented layout to provide improved power handling over conventional ...

Read more...