Passive Components


Tiny common-mode choke coil arrays

3 October 2007 Passive Components

Murata has released its DLP1ND series of chip common-mode choke coil arrays – claimed to be the smallest in the industry at 1,5 x 0,65 x 0,45 mm – suitable for noise suppression in high-speed differential transmission lines.

The components boast a coupling coefficient between coils of 0,98 or higher. This helps to ensure low values of differential mode impedance in the signal passband, hence minimising signal waveform distortion. To suppress reflection of input signals, the line impedance of the transmission line and the impedance of the common-mode choke coils are designed to match. In this way, only common mode noise is effectively suppressed, without affecting the high-speed signal waveform.

The series consists of four items, having common-mode impedances of 67, 90, 120, and 160 Ω (at 100 MHz).





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PCB connectors for power systems
Phoenix Contact Passive Components
With the new PC 6 PCB connectors with screw connection, Phoenix Contact’s classic connection technology is available with enhanced touch protection for the new pin connector pattern.

Read more...
Polymer caps with very high ripple current capability
RS South Africa Passive Components
TDK Corporation has released the B40910 series of hybrid polymer capacitors, which can handle up to 4,6 A at 100 kHz and 125°C.

Read more...
SPE connector range
Phoenix Contact Passive Components
Single Pair Ethernet (SPE) is a communication technology that realises Industry 4.0 and IIoT applications, and Phoenix Contact’s Combicon range are ideal for SPE connections.

Read more...
TDK expands MLCC series
RS South Africa Passive Components
TDK Corporation has expanded its CGA series of multilayer ceramic capacitors, currently being the highest capacitance in 100 V products for automotive applications.

Read more...
Inductor supports temperatures up to 150°C
RS South Africa Passive Components
TDK has launched a highly durable inductor for automotive A2B applications that supports a wide temperature range of -55 up to 150°C.

Read more...
Long-range passive infrared motion sensor
Future Electronics Passive Components
Panasonic Industry (PaPIRs) recently introduced he world’s most compact long-range passive infrared motion sensor, for installation heights of up to 15 metres.

Read more...
Isolated solid state relay
Altron Arrow Passive Components
The ISO808, ISO808-1 (PowerSO-36) and ISO808Q, ISO808Q-1 (TFQFPN32) are galvanic isolated eight-channel drivers featuring a low supply current.

Read more...
Low-profile power inductors
RS South Africa Passive Components
TDK Corporation has announced the introduction of its new PLEA85 series of high-efficiency power inductors developed for battery-powered wearables and other devices.

Read more...
Miniature capacitor for automotive applications
Avnet Abacus Passive Components
Murata has released its LLC series of multi-layer ceramic capacitors for automotive applications, that feature a reversed termination for low ESL.

Read more...
Sealed tantalum capacitors
Electrocomp Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.

Read more...