DSP, Micros & Memory


32 Mbit serial Flash memory with dual I/O

3 October 2007 DSP, Micros & Memory

STMicroelectronics has released the new M25PX32, a 32 Mbit device that is the first of the sector, sub-sector erase Serial Flash family to be offered with dual I/O. Designed to address the needs of applications requiring high clock frequency, the device guarantees the support of a 75 MHz frequency through the entire 2,7 to 3,6 V supply voltage range and through the -40°C to 85°C industrial temperature range. Thanks to dual I/O, during the fast read phase the dual output command allows the system to double the data transfer bandwidth, effectively clocking the NOR at the equivalent of 150 MHz, again over the full voltage range. In the fast program phase both the input and output pins are used for programming the memory. In addition to device-security features such as protection after power up, the new M25PX32 also features an additional 64 Byte user-lockable, one-time programmable (OTP) area, and the possibility to set the memory as read-only.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Wi-Fi 6 and Bluetooth LE co-processor
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released its ST67W611M1, a low-power Wi-Fi 6 and Bluetooth LE combo co-processor module.

Read more...
High performance SDR design considerations
RFiber Solutions Editor's Choice DSP, Micros & Memory
As the spectrum gets increasingly crowded, and adversaries more capable, the task of examining wide bands and making sense of it all, while not missing anything, gets harder.

Read more...
Direct RF converters and FPGAs boost EW applications
RFiber Solutions DSP, Micros & Memory
The latest boost to electronic warfare designs comes from emerging FPGA architectures that combine advanced RF converters and high-performance processing engines in a single package.

Read more...
Empowering innovation with ST’s AI processors
Altron Arrow AI & ML
Artificial intelligence is no longer just a futuristic concept – it is here, and it is transforming industries at an unprecedented pace.

Read more...
1-Wire EEPROM with secure authenticator
Altron Arrow DSP, Micros & Memory
The DS28E54 secure authenticator combines FIPS 202-compliant secure hash algorithm (SHA-3) challenge and response authentication with secured electrically erasable programmable read-only memory.

Read more...
The 6 GHz band radio solution
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Analog Devices’ 16 nm transceiver family offers a highly integrated solution for this new frequency band, featuring low power consumption and high performance.

Read more...
New clock generator family
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Based on Skyworks’ fifth generation DSPLL and MultiSynth technologies, these devices enable any-frequency, any-output clock generation.

Read more...
Dual accelerometers on the same die
Altron Arrow Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.

Read more...
Microchip enhances digital signal controller lineup
Future Electronics DSP, Micros & Memory
Microchip Technology has added the dsPIC33AK512MPS512 and dsPIC33AK512MC510 Digital Signal Controller families to its dsPIC33A DSC product line.

Read more...
Ultra-low-power wireless module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STM32WBA5MMG from STMicroelectronics is an ultra-low-power, small form factor, certified 2,4 GHz wireless module that supports Bluetooth LE, Zigbee 3.0, OpenThread, and IEEE 802.15.4 proprietary protocols.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved