Circuit & System Protection


Active filter protects DC-DC converters in harsh environments

17 October 2007 Circuit & System Protection

XP Power has released a new 500 W active filter unit for use in harsh electrical environments. The DSF500 is designed to protect DC-DC converters from the surges, spikes and ripples that are typically found on the electrical system of any military platform, such as an aircraft or vehicle. The filter meets the military specification MIL-STD 1275A-D, without the need to incorporate any additional components. This allows platform mounted systems to utilise standard industrial DC-DC converters without risk of failure or damage due to supply transients and noise. Input voltage is within the range of 10 to 34 V d.c., while output voltage is tracked and clamped to below 36 V d.c.

The DSF500's low loss, MOSFET-based protection circuit ensures that the unit can provide continuous reverse voltage protection. Attached systems are protected from incorrect, potentially damaging, electrical supply connections. The filter also protects against over-current conditions; should the demand exceed 28 Amps, a warning signal is given that can be used either to disable the DSF500 or turn off the attached devices in order to reduce the current. A disable function allows the system designer to turn off the unit remotely if required.

The unit measures 57,90 x 57,90 x 16, 45 mm. Compliance to electromagnetic immunity MIL-STD 461E specification can also be achieved with some design effort.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SIGLENT launches new 8 GHz DSO
Vepac Electronics Test & Measurement
SIGLENT has unveiled the enhanced SDS7000A/AP models, building on the success of its SDS7000A high-resolution digital oscilloscope series.

Read more...
Electrical fire safety in lithium-ion battery rooms
Circuit & System Protection
Pratliperl is a non-combustible, ultra-lightweight aggregate that can be mixed with cement and applied as a plaster or screed to walls, floors, and ceilings.

Read more...
Clearing the Static: ESD training in the workplace
Actum Circuit & System Protection
To protect sensitive electronic components, A structured, consistent, and sustainable ESD training program is essential.

Read more...
Protect your pumps – protect your profit
NewElec Pretoria Circuit & System Protection
In South Africa’s demanding agricultural landscape, irrigation is not just an essential service – it is the heartbeat of farm productivity.

Read more...
Mission-critical RF transceiver
Vepac Electronics Telecoms, Datacoms, Wireless, IoT
The Iris SQN9506 from Sequans Communications is a wide-band RF transceiver that operates from 220 MHz to 7,125 GHz.

Read more...
Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...
Clearing the Static: ESD and installation: A durable antistatic solution
Actum Circuit & System Protection
ESD flooring provides a reliable, long-term solution for managing static electricity by safely dissipating static charges through the floor to a designated ground point.

Read more...
Versatile PoE extender
Vepac Electronics Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.

Read more...
Ultra-portable spectrum analyser
Vepac Electronics Test & Measurement
The PXN-400Z from Harogic is a handheld spectrum analyser covering a frequency range of 9 kHz to 40 GHz with a 100 MHz analysis bandwidth.

Read more...
Versatile 3-in-1 instrument
Vepac Electronics Test & Measurement
The ARB Rider AWG-2000 is the cost-effective and powerful two or four channel arbitrary function generator and two or four channel arbitrary waveform generator with advanced sequencer functionality.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved