Analogue, Mixed Signal, LSI


Stereo amplifier creates 3D audio effects

14 November 2007 Analogue, Mixed Signal, LSI

STMicroelectronics developed a compact audio power amplifier chip - intended for mobile phones and for other portable audio products - which creates 3D audio effects in the stereo speaker outputs to add impact and a surround-sound feel to MP3 and video files. The TS4997 can deliver 1,2 W per channel of continuous average output power into 8 Ω loads while its high-efficiency design and ultra-low standby power help to extend battery life.

With the device, no signal pre-processing is required, and it needs no external components to be added to the compact 4 mm square package, minimising space requirements and ensuring low production cost. A two-pin digital interface controls the 3D effect through independent gain adjustments for each audio channel, while additional left and right channel standby mode pins allow the supply current to be cut to less than 10 nA per channel.

The amplifier chip operates on a 2,7 V to 5,5 V power supply, providing excellent immunity to supply interference with 85 dB PSRR. Signal-to-noise ratio (SNR) is a high 106 dB(A), and pop and click interference is suppressed.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Wi-Fi 6 and Bluetooth LE co-processor
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released its ST67W611M1, a low-power Wi-Fi 6 and Bluetooth LE combo co-processor module.

Read more...
High-temperature closed-loop MEMS accelerometer
RS South Africa Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.

Read more...
Empowering innovation with ST’s AI processors
Altron Arrow AI & ML
Artificial intelligence is no longer just a futuristic concept – it is here, and it is transforming industries at an unprecedented pace.

Read more...
1-Wire EEPROM with secure authenticator
Altron Arrow DSP, Micros & Memory
The DS28E54 secure authenticator combines FIPS 202-compliant secure hash algorithm (SHA-3) challenge and response authentication with secured electrically erasable programmable read-only memory.

Read more...
The 6 GHz band radio solution
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Analog Devices’ 16 nm transceiver family offers a highly integrated solution for this new frequency band, featuring low power consumption and high performance.

Read more...
New clock generator family
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Based on Skyworks’ fifth generation DSPLL and MultiSynth technologies, these devices enable any-frequency, any-output clock generation.

Read more...
Dual accelerometers on the same die
Altron Arrow Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.

Read more...
M12 panel mount connectors
Communica Interconnection
Binder, a specialist in industrial circular connectors, offers a particularly wide range of M12 panel mount connectors that cover a wide variety of connection types, materials, and fastening solutions.

Read more...
Dual-range IMU with edge processing
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.

Read more...
Ultra-low-power wireless module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STM32WBA5MMG from STMicroelectronics is an ultra-low-power, small form factor, certified 2,4 GHz wireless module that supports Bluetooth LE, Zigbee 3.0, OpenThread, and IEEE 802.15.4 proprietary protocols.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved