High brightness LED driver

6 February 2008 Opto-Electronics

The NCP3065 switching regulator, produced by ON Semiconductor, is designed to efficiently drive high brightness LEDs (HB-LED) typically used in low voltage lighting, landscape path and solar lighting, Halogen bulb replacements, and automotive and marine lighting. Several reference designs are available that drive the industry's latest HB-LEDs in various buck, boost and SEPIC applications.

The NCP3065 is a 1,5 A monolithic switching regulator that features a very low feedback voltage of 235 mV. The feedback voltage is used to regulate the average current through the LED string in a constant current regulator configuration. The low feedback voltage also allows the use of a smaller and more cost competitive sense resistor. The internal reference voltage is trimmed to 2% to provide very accurate current regulation even with wide variations in input voltage, LED forward voltage and inductor tolerance.

The device has a wide input voltage range from 3 V up to 40 V to allow operation from 12 V a.c. and 12 V d.c. supplies commonly used for lighting applications and unregulated power supplies such as lead acid batteries. The devices can be configured in a controller topology with the addition of an external transistor to support higher LED currents beyond the 1,5 A rated switch current of the internal transistor. In a boost configuration, the external switch also enables the capability of higher output voltages.

Further reading:

PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...

---

Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...

---

Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...

---

Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...

---

High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...

---

High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...

---

Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...

---

New generation of Ethernet media converters
IOT Electronics Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.

Read more...

---

PIN photodiode with integrated lens
RFiber Solutions Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.

Read more...

---

RGBIR sensor with I2C interface
Electrocomp Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.

Read more...

---