|
|
Highly efficient POL buck converter solution
6 February 2008, Power Electronics / Power Management
International Rectifier has introduced the iP1206, a fully optimised solution for synchronous buck applications including telecom and networking equipment.
The iP1206 is the latest addition to the iPOWIR integrated power conversion stage product line, designed for two-phase single output applications up to 30 Amps or dual independent outputs up to 15 Amps. Both options utilise synchronised 180° out-of-phase operation, reducing input current ripple and input voltage ripple. The device is comprised of an optimised power stage and a full-function PWM control IC to achieve high power density.
As with all iPOWIR products, the iP1206 is simple to design and easy to replicate across a wide range of voltage and current rails because all of the critical components are integrated and only a few external passive components are required for a complete point-of-load solution.
Features include a switching frequency up to 600 kHz per channel, lossless current limit, over-voltage and over-temperature protection, pre-bias start up, external synchronisation, output voltage tracking and sequencing. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Rugged DC-DC converters
28 August 2019, Vepac Electronics, Power Electronics / Power Management
XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
- Power controller for smart home appliances
28 August 2019, RF Design, Power Electronics / Power Management
Qorvo has introduced a new intelligent power control solution for reducing energy consumption, bulk, weight and noise in smart home appliances, AC-powered fans and compressors. This mixed-signal system-in-package ...
- UPS battery configuration made easy
28 August 2019, Forbatt SA, Power Electronics / Power Management
Determining the UPS (uninterruptible power supply) battery configuration using a formula can be quite complicated and, since many users are not very familiar with it, a more simplified method can be used ...
- Qi-compliant wireless charging coils
28 August 2019, Avnet South Africa, Passive Components
Vishay has expanded its offering of Qi-compliant wireless charging transmitter and receiver coils with the introduction of 14 new products in industry-standard shield sizes.
Consisting of eight single-coil ...
- LED flicker, and how to prevent it
28 August 2019, Avnet South Africa, Opto-Electronics
With the growing popularity of LED lighting, especially now that very cheap LED luminaires are coming to the market, flicker is becoming more of a problem.
Flicker, a repetitive switching on and off ...
- Bidirectional laboratory power supply
28 August 2019, Vepac Electronics, Power Electronics / Power Management
EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
- 3 Watt DC-DC converters
28 August 2019, Avnet South Africa, Power Electronics / Power Management
Aimtec has introduced three new series of switching regulators – the AMSRB1-78JZ, AMSRL1-78JZ and AMSRL-78JZ – all meeting the EN62368 standard and suitable for IoT (Internet of Things) applications.
The ...
- Isolated PFC module
28 August 2019, Conical Technologies, Power Electronics / Power Management
SynQor has added a new isolated PFC (power factor correction) module to its AeroQor range of products for the airborne electronics market. Featuring highly efficient active power factor correction, the ...
- DC-DC converter for DIN-rail mounting
28 August 2019, Vepac Electronics, Power Electronics / Power Management
MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...
- DC UPS for DIN-rail mounting
31 July 2019, Vepac Electronics, Power Electronics / Power Management
The Effecta DCH series power supplies with UPS function are suitable for a variety of applications, and their robust IP 20 housing is applicable for all DIN-rail applications. With its power boost mode, ...
- 80 V buck driver for LEDs
26 June 2019, Altron Arrow, Power Electronics / Power Management
Infineon Technologies’ new LED driver, the ILD8150/E, features an innovative hybrid dimming mode technology for achieving 0,5 percent of the target current. With its supply voltage range from 8 V up to ...
- AC-DC power supplies for medical devices
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power has announced two new ranges of AC-DC power supplies that provide BF class insulation for healthcare applications where ehnanced EMC performance is a key requirement.
The PBR500 and PBR650 ...
|
|
