Power Electronics / Power Management


DC-DC converter with high power density

20 February 2008 Power Electronics / Power Management

Power-One has introduced the FBA48T25280 DC-DC converter, providing a 25 A, user-adjustable 16,8 to 32,2 V output. This full brick combines efficiencies exceeding 92% with advanced thermal management techniques to deliver high power densities and reduced current deratings in elevated ambient temperature RF amplifier applications.

The device features remote-differential output-voltage sense and active current sharing which enables load sharing within ±10%. The input voltage range is from 36 to 75 V, and a 7 to 9 V auxiliary output sources 20 mA. Also integrated are an output-good signal, the capability to start-up into pre-biased loads, and an onboard input differential LC-filter. Protections include input under-voltage lockout, output over-voltage and over-current, and over-temperature.

The FBA48T25280 utilises an industry-standard full-brick footprint of 61 x 117 mm and a low profile 12,7 mm height. RoHS lead-free and lead-solder exempted versions are available. All materials meet the UL94, V-0 flammability rating and the devices operate in the temperature range from -40 to 100°C.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Power management companion chips
29 April 2020, NuVision Electronics , Power Electronics / Power Management
Silicon Labs announced a new line of energy-friendly power management ICs (PMICs) serving as dedicated companion chips for EFR32 wireless devices and EFM32 microcontrollers (MCUs). The EFP01 PMIC ...

Read more...
Automotive MOSFETs in a variety of packages
29 April 2020, Altron Arrow , Power Electronics / Power Management
Reducing CO2 emissions of passenger cars is accelerating 48 V board net adoption. For this emerging 48 V market, Infineon Technologies offers a broad portfolio of automotive 80 V and 100 V MOSFETs as ...

Read more...
DC-DC converter for aerospace/defence
25 March 2020, Future Electronics , Power Electronics / Power Management
Vicor announced the DCM5614, an isolated, regulated 270 V-28 V DC-DC converter with an output power rating of 1300 W in a 142,2 x 35,6 x 9,4 mm VIA package. Providing power density of 27,52 W/cm3 at a ...

Read more...
Switchers for high-power LED displays
25 March 2020, EBV Electrolink , Power Electronics / Power Management
Power Integrations’ InnoSwitch3-MX isolated switcher IC family has been expanded with the addition of three new PowiGaN devices. As part of a chipset with Power Integrations’ InnoMux controller IC, the ...

Read more...
Synchronous buck converter
29 April 2020, Altron Arrow , Power Electronics / Power Management
Diodes Incorporated introduced the AP62600 synchronous DC-DC buck converter for point-of-load (POL) conversion in applications such as TVs, monitors, white goods, home appliances, consumer electronics ...

Read more...
Tiny step-down regulator
29 April 2020, Altron Arrow , Power Electronics / Power Management
The LTM4657 is part of Analog Devices’ family of tiny, high-efficiency, identical pin-out, step-down µModule devices. The LTM4657 is designed to operate at lower switching frequencies than the LTM4626 ...

Read more...
Stackable DC-DC buck converter
29 April 2020, Avnet South Africa , Power Electronics / Power Management
Texas Instruments introduced a new 40 A SWIFT DC-DC buck converter, offering first-of-its-kind stackability of up to four ICs. The TPS546D24A PMBus buck converter can deliver up to 160 A of output current ...

Read more...
Open-frame configurable power supplies
29 April 2020, Vepac Electronics , Power Electronics / Power Management
The RB series of configurable open-frame power supplies has been expanded. Based on a unique concept, the Cosel RB series offers three configurable isolated outputs, with one having a reinforced isolation ...

Read more...
Why low quiescent current matters for longer battery life
29 April 2020, Avnet South Africa , Power Electronics / Power Management
From healthcare and biosensing to wearables and environmental sensing, nearly all IoT devices rely on batteries that must perform reliably and over an extended period of time in a variety of conditions.

Read more...
Bipolar DC-DC supply design sources and sinks current
29 April 2020, Altron Arrow , Power Electronics / Power Management
Most electronic systems depend on power voltage rails that are either positive or negative, but a few applications require individual rails that can be both. In these situations, positive or negative ...

Read more...