Maxim's MAX1810 is a smart regulator for Ethernet network interface cards (NICs), modem cards and other devices that are system compliant with PCI. The MAX1810 delivers an uninterrupted +3,3 V at up to 500 mA from a +5 V main supply, or a 3,3 V auxiliary supply. When both main and standby supplies drop below 4,1 V, an internal switch connects the PCI system's +3,3 V auxiliary input to the output. The internal switch is only 0,18 W and minimises voltage drop from the auxiliary supply.
The main and standby inputs generate the +3,3 V output via CMOS linear regulators with excellent line and load regulation. Only a 1 µF ceramic capacitor is required at the output to guarantee stability. Under short-circuit conditions, the output current is limited to 900 mA. Thermal-overload protection turns off the MAX1810 if the chip temperature exceeds +170°C. Special circuitry also prevents reverse current from flowing from the output to any inactive or low-voltage input.
The MAX1810 is available in a compact, high-power 8-pin SO package, capable of dissipating up to 0,9 W.
Finding value for money with your IoT battery Uniross Batteries
Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.
Read more...Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...Cost-effective microcontroller series Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...Understanding two key tools for cleaner serial data Altron Arrow
Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version