Power Electronics / Power Management


Accessory provides second HV output for power supply

28 February 2001 Power Electronics / Power Management

Ultravolt's AUX Series accessory provides a second fixed HV output in addition to the adjustable main high voltage power supply output. This second output is set for a specific fixed voltage at the factory. The AUX output is achieved by adding a daughterboard inside the company's 1/16A to 6A or 1/16C to 6C high voltage power supplies.

The AUX board is encapsulated with the main high voltage power supply, but still leaves all of the advantages of the base power supply. Typical applications are: bi-polar outputs, ionisation/strike, trigger coils, pulse generator or amplifiers, tube elements such as G1, G2, cathode, etc.

The AUX output is a nonisolated, unipolar output and is the selected polarity not dependent on the polarity of the base HVPS. Full capability is available over an input range of 12 to 15 V d.c. ±10% for 4 W units and 24 to 28 V d.c. ±5% for 20/30 W units. The AUX fixed output is fully functional when the main output voltage is adjusted from 100 to 75%. As the main output is adjusted from 75 to 50% the AUX output current is reduced from 100 to 0%.

Fixed outputs available are: 47 V at 2 mA; 450 V at 1 mA; 94 V at 2 mA; 600 V at 1 mA; 141 V at 2 mA; 750 V at 1 mA; 188 V at 2 mA; 900 V at 1 mA; 235 V at 2 mA; 1050 V at 1 mA; 282 V at 2 mA; 329 V at 2 mA. Note that the specified AUX output should be less than 40% of the main output. The HV output connection is via an additional pair of standard square IDC pins. These pins can be used for PCB mounting or direct wiring.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Next-gen power meter
Electrocomp Express Power Electronics / Power Management
The VT-PWR-LV is a next-gen Vista Touch power meter from Trumeter for single, split, and three-phase systems.

Read more...
Advanced PMIC for high-performance AI applications
ASIC Design Services Power Electronics / Power Management
Microchip Technology has announced the MCP16701, a Power Management Integrated Circuit (PMIC) designed to meet the needs of high-performance MPU and FPGA designers.

Read more...
New SiC power MOSFET
Future Electronics Power Electronics / Power Management
STMicroelectronics’ SCT012H90G3AG is a robust, automotive-grade SiC MOSFET, engineered for demanding power electronics, featuring a 900?V drain-source voltage and exceptionally low on-resistance of 12?mO at 60?A.

Read more...
Fundamental motor control design challenges and solutions
Power Electronics / Power Management
Mouser Electronics has announced a new eBook in collaboration with Qorvo, featuring industry experts providing key insights into methods, power efficiency and integration solutions available for motor control applications.

Read more...
Power management IC for battery products
Power Electronics / Power Management
The nPM1304 PMIC complements Nordic’s nPM1300 PMIC with a highly integrated, ultra-low power solution and precision fuel gauging for small size battery applications.

Read more...
Powering Innovation eBook: Changing what’s possible
Power Electronics / Power Management
This exclusive read, entitled ‘Changing what’s Possible,’ delves into how power dense Vicor modules enable many world-changing innovations across various sectors.

Read more...
16-channel multicell battery monitor
Altron Arrow Power Electronics / Power Management
The ADBMS6830B is a multicell battery stack monitor that measures up to 16 series-connected battery cells with a lifetime total measurement error of less than 2 mV.

Read more...
Reliable redundancy with the Mibbo M3DN Series
Conical Technologies Power Electronics / Power Management
Designed for use with two parallel-connected power supplies, the M3DN Series allows for true redundancy, making it ideal for mission-critical applications.

Read more...
Automotive power-over-coax inductor
RS South Africa Power Electronics / Power Management
TDK has launched the ADL8030VA, a high-performance inductor designed specifically for power-over-coaxial applications.

Read more...
Rugged PSU for challenging conditions
Conical Technologies Power Electronics / Power Management
Built for rugged reliability, the Mibbo MFC Series delivers stable, efficient power in environments where moisture, dust, and temperature extremes are everyday challenges.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved