Circuit & System Protection


Extended range of EMC output filters for motors

30 April 2008 Circuit & System Protection

Epcos' SineFormer series of EMC output filters has been extended by a range designed for applications up to a rated voltage of 760 V. The new B84143V*R290 spectrum of filters is available in current stages of 95 A, 180 A and 320 A. Depending on their type, they are operated at clock frequencies from 2,5 kHz.

The technology means that shielded motor leads are unnecessary and bearing currents significantly reduced. Compared with the use of shielded lines, savings in system costs already begin from a lead length of less than 100 m.

Because the filters differ from their conventional sine-wave counterparts by dispensing with shielded lines, breakeven can already be reached from about 25 m. To this consideration must be added the significant technical benefits of this technology such as an IP20 package, noise reduction and no feedback to the DC link circuit.

Typical applications are crane installations, pumps, HVAC, retrofitting of existing equipment for converter operation, and all applications using long shielded motor leads.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

New 3dB hybrid couplers
Electrocomp Telecoms, Datacoms, Wireless, IoT
Designed to facilitate the continued evolution of high-frequency wireless systems in various market segments, the new DB0402 3dB 90° hybrid couplers provide repeatable high-frequency performance compatible with automated assembly.

Read more...
Robust series of vertical-mating battery connectors
Electrocomp Interconnection
KYOCERA AVX has further expanded its industry-leading selection of standard battery connectors with the introduction of the new 9155-900 Series 2,5 mm-pitch vertical-mate battery connectors.

Read more...
Clearing the Static: ESD and installation: A durable antistatic solution
Actum Circuit & System Protection
ESD flooring provides a reliable, long-term solution for managing static electricity by safely dissipating static charges through the floor to a designated ground point.

Read more...
Why wait to automate
NewElec Pretoria Circuit & System Protection
NewElec’s initiative helps you gain operational visibility via HMI or PLC by retrofitting intelligent motor protection relays without replacing MCCs or rewiring the plant.

Read more...
Clearing the Static: Effectively control static in your workplace
Actum Circuit & System Protection
Controlling electrostatic discharge in the workplace is crucial to protect sensitive electronic equipment from damage. Implementing an ESD control program involves various measures and tests.

Read more...
Low-profile tantalum chip capacitors
Electrocomp Passive Components
These general-purpose tantalum capacitors from Kyocera AVX are available in multiple case sizes with low profile options.

Read more...
Compact high-performance antennas
Electrocomp Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX offers a variety of extremely compact and high-performance internal, on-board, multiprotocol 2,4 GHz antennas ideal for use in SiP applications.

Read more...
Clearing the Static: Staying grounded: Ensuring effective ESD control
Actum Circuit & System Protection
To maintain reliable electrostatic discharge control, regular testing and accurate measurement are essential, with grounding products and ESD testing equipment being vital.

Read more...
Track with precision
Electrocomp Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX provides innovative antennas for cellular, LTE-M, NB-IoT, LoRa, GNSS, BLE, UWB, Wi-Fi, and future Satellite IoT.

Read more...
RGBIR sensor with I2C interface
Electrocomp Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved