mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Stray voltage eliminator now in single packs
28 May 2008, Test & Measurement

Comtest has announced that Fluke's SV225 Stray Voltage Eliminator is now available in single packs. This stray voltage eliminator is an excellent solution for engineers who encounter stray or ghost voltages while testing for live or dead circuits with a high impedance multimeter.

Stray or ghost voltages occur from capacitive coupling which takes place between energised and non-energised, non-connected adjacent wiring. On energised wires, the S225 will indicate the real voltage and on non-energised circuits, the meter will read close to zero, even if there are stray voltages.

The S225 is compatible with all instruments and test leads that accept standard 4 mm, shrouded banana connectors. The nominal resistance is 3000 Ω at 25°C and rated CAT III 1000 V, CAT IV 600 V.

For more information contact Comtest, +27 0)11 254 2200, info@comtest.co.za, www.comtest.co.za


Credit(s)
Supplied By: Comtest
Tel: +27 10 595 1821
Fax: +27 11 608 1525
Email: sales@comtest.co.za
www: www.comtest.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • EXFO launches new category of fibre testing solutions
    26 June 2019, Lambda Test, Test & Measurement
    EXFO has launched what it describes as the first optical fibre multimeter (OFM). Called Optical Xplorer, it aims to make fibre testing simple for all frontline technicians, whether beginner or expert, ...
  • Handheld industrial Ethernet tester
    26 June 2019, Coral-i Solutions , Test & Measurement
    Ideal Networks has launched NaviTEK IE, a handheld network tester designed for commissioning, preventative maintenance and troubleshooting of PROFINET industrial Ethernet networks, plus standard Ethernet ...
  • PCB cleaning diagnostic system
    26 June 2019, Electronic Industry Supplies, Test & Measurement
    The Verinas system from PBT Works is a dedicated piece of AOI (automatic optical inspection) equipment for evaluating remaining flux residues on PBT glass test boards. The system can be used by electronics ...
  • 2-channel digital storage oscilloscope
    26 June 2019, Vepac Electronics, Test & Measurement
    The Model 1335 is PeakTech’s latest-generation 2-channel digital storage oscilloscope (DSO) for the education and professional sector. With its attractive price-performance ratio, modern technology and ...
  • Body-worn EMF monitor
    29 May 2019, Accutronics, Test & Measurement
    For those working with high-intensity electromagnetic fields (EMF), such as in the near field region of radar antennas, broadcast transmitters or cellular base stations, it is vital to wear personal safety ...
  • Optical spectrum analyser
    29 May 2019, Coral-i Solutions , Test & Measurement
    Anritsu announced the sales launch of the new MS9740B spectrum analyser which has been developed for evaluating the output characteristics of optical active devices used by optical communications systems. ...
  • New scan capabilities for EMI receiver
    29 May 2019, Concilium Technologies, Test & Measurement
    Keysight Technologies has added time domain scan (TDS) and real-time scan (RTS) capabilities to the N9048B PXE electromagnetic interference (EMI) receiver, enabling real-time measurements and diagnostics ...
  • Passive intermodulation analyser
    30 April 2019, Actum Electronics, Test & Measurement
    Passive intermodulation (PIM) is one of the main causes of faults in modern networks. PIM can significantly reduce the network quality with regard to range and data transmission. PIM is caused by a number ...
  • Vacuum test fixture
    30 April 2019, Electronic Industry Supplies, Test & Measurement
    With its newly designed vacuum test fixtures, Ingun has simplified mass testing of a small number of PCB (printed circuit board) versions. The vacuum test fixture combines intuitive handling and a robust, ...
  • Optical spectrum analyser
    30 April 2019, Coral-i Solutions , Test & Measurement
    Anritsu announced the sales launch of the new MS9740B spectrum analyser which has been developed for evaluating the output characteristics of optical active devices used by optical communications systems. ...
  • New scan capabilities for EMI receiver
    30 April 2019, Concilium Technologies, Test & Measurement
    Keysight Technologies has added time domain scan (TDS) and real-time scan (RTS) capabilities to the N9048B PXE electromagnetic interference (EMI) receiver, enabling real-time measurements and diagnostics ...
  • Body-worn EMF monitor
    30 April 2019, Accutronics, Test & Measurement
    For those working with high-intensity electromagnetic fields (EMF), such as in the near field region of radar antennas, broadcast transmitters or cellular base stations, it is vital to wear personal safety ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.