Passive Components


Ferrite offers good saturation over wide temperature range

28 May 2008 Passive Components

L Material from Magnetics is a MnZn power ferrite with a permeability of 900, which is optimised for transformer and inductor applications from 500 kHz to 3 MHz. Within this range, AC core losses are minimised and the loss versus temperature curve exhibits its minimum at a suitable elevated temperature between 70°C and 100°C. In addition, the Curie temperature is over 300°C, so that saturation is good across a wide temperature range.

L Material is a suitable solution for many circuit requirements, especially DC-DC converters and high frequency filters. It is offered in a wide variety of core shapes and sizes up to 30 mm, including planars, PQs, toroids and other shapes. Larger sizes are also available for special applications.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Thick-film chip resistors
29 April 2020, Electrocomp , Passive Components
Bourns announced the introduction of its new Model CR01005 series thick-film chip resistor. This extra small – 01005 inch (0402 metric) – CR01005 series broadens the general purpose thick-film chip resistor ...

Read more...
Automotive-grade MLCCs
29 April 2020, TRX Electronics , Passive Components
Yageo's automotive grade MLCC (multilayer chip capacitor) AC/AS series is AEC-Q200 qualified as well as MIL-STD-020D tested to ensure its reliability under various temperatures (from -55°C to +150°C) ...

Read more...
Chip resistors in automotive grade
29 May 2020, Altron Arrow , Passive Components
Vishay has enhanced its MC AT precision series of automotive grade thin film chip resistors with a wider range of resistance values from 47 Ω to 10 MΩ in the 1206 case size. The MCA 1206 AT is the industry’s ...

Read more...
Storage choke against harmonic distortion
29 April 2020, Würth Elektronik eiSos , Passive Components
The WE-LHMD is an SMT-mountable storage choke from Würth Elektronik optimised for filter topologies in Class-D amplifiers. Thanks to their iron powder cores, the high-current inductors for audio applications ...

Read more...
High-temperature shielded power inductors
29 April 2020 , Passive Components
The Bourns inductive components product line is introducing the Model SRP6030VA and SRP1040VA high-temperature shielded power inductors. These models are built with a new metal alloy powder formulation ...

Read more...
Passive components and subsystems for demanding applications
29 April 2020, Actum Group , Passive Components
Represented locally by Actum Group, Exxelia is a specialised manufacturer of high-quality Hi-Rel passive components and precision subsystems. Exxelia products meet complex specifications and cater for ...

Read more...
Storage choke for audio amplifiers
29 April 2020, Würth Elektronik eiSos , Passive Components
With WE-HIDA, Würth Elektronik offers a storage choke optimised for Class D amplifiers. The high-current inductor is characterised by low core losses, very low DC resistances from 2,5 mΩ to 14,8 mΩ and ...

Read more...
Radio interference suppression choke
29 April 2020, Würth Elektronik eiSos , Passive Components
Würth Elektronik is complementing its AEC-Q200 product group of qualified radio interference suppression chokes with an SMT-mountable model, the WE-RCIS. The rod core choke, available in four versions, ...

Read more...
Bypass capacitor kit for MMIC amplifiers
29 April 2020, RF Design , Passive Components
High-frequency MMIC amplifiers with broadband gain need to be protected from RF noise on the supply lines, particularly RF energy coupled back into the device from its output. Supply noise creates challenges ...

Read more...
Automotive grade aluminium capacitors
29 April 2020, Altron Arrow , Passive Components
Vishay introduced two new series of automotive grade, surface-mount aluminium electrolytic capacitors that combine high voltages up to 450 V with operating temperatures up to +125°C and useful life up ...

Read more...