mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Variable-fit pipe-mounted temperature sensor
11 June 2008, Test & Measurement

Epcos has introduced a pipe-mounted temperature sensor designed for permanent mounting on pipe diameters of 12 to 20 mm, the most common sizes used in heating systems.

Its patented design, which features a plastic body and clip, makes it particularly easy to install. A spring in the clip provides the tension needed to create a good contact between the pipe and sensor element.

The pipe-contact sensor is designed for a temperature range from -5 to +110°C in a dry environment. It has a response time of below 3 seconds. On request, the sensor may be designed with identifying elements for various pipe diameters and fitted with various connector systems.


Credit(s)
Supplied By: Electrocomp
Tel: +27 11 458 9000
Fax: +27 11 458 9034/5
Email: andrew@electrocomp.co.za
www: www.electrocomp.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Ferrite magnetic design tool
    26 June 2019, Electrocomp, Passive Components
    The MDT software from TDK allows application-related parameters to be calculated for all available Epcos ferrite cores and/or materials. It provides access to digitalised material data including their ...
  • Handheld PoE tester
    26 June 2019, Coral-i Solutions , Test & Measurement
    Ideal Networks has launched a new handheld tester that eliminates guesswork when installing, maintaining and troubleshooting PoE devices and data cabling. PoE Pro measures and reports PoE class, voltage/voltage ...
  • N-channel enhancement mode FET
    26 June 2019, Electrocomp, Power Electronics / Power Management
    Diotec Semiconductor’s 2N7002 is a widely used small-signal MOSFET in SOT-23 package. With an RDS(on) of maximum 2 Ω, the component offers a lower on-state resistance than the common industry standard. ...
  • Debugging probe for STM32 MCUs
    31 July 2019, Altron Arrow, Test & Measurement
    The STLINK-V3MINI probe, new from STMicroelectronics, combines the features of the STLINK-V3SET with standalone simplicity for faster programming and ease of use. The compact, portable probe can be ...
  • Cost-effective tools for makers and small businesses to innovate
    31 July 2019, TRX Electronics, Test & Measurement
    In addition to professional engineers, makers and hobbyists are now able to contribute significantly to innovation in our modern world – as they can develop ideas with passion and without the financial and logistical constraints that often stifle ideas in large corporations.
  • Sniffer software gets J-Link RTT terminal plugin
    31 July 2019, RF Design, Test & Measurement
    Despite being fans of the Real-Time Trace (RTT) feature in Segger’s J-Link debug probes, engineers at Tibbo found that Segger’s own RTT Viewer software was a bit too simple for their needs, and so created ...
  • Sealed enclosures for industrial electronics
    26 June 2019, Electrocomp, Enclosures, Racks, Cabinets & Panel Products
    Hammond Manufacturing has added 36 new configurations to its 1554 and 1555 sealed enclosure families for Industry 4.0. Available in ABS or polycarbonate with styled, opaque, clear or smoked lids, the ...
  • EXFO launches new category of fibre testing solutions
    26 June 2019, Lambda Test, Test & Measurement
    EXFO has launched what it describes as the first optical fibre multimeter (OFM). Called Optical Xplorer, it aims to make fibre testing simple for all frontline technicians, whether beginner or expert, ...
  • Handheld industrial Ethernet tester
    26 June 2019, Coral-i Solutions , Test & Measurement
    Ideal Networks has launched NaviTEK IE, a handheld network tester designed for commissioning, preventative maintenance and troubleshooting of PROFINET industrial Ethernet networks, plus standard Ethernet ...
  • PCB cleaning diagnostic system
    26 June 2019, Electronic Industry Supplies, Test & Measurement
    The Verinas system from PBT Works is a dedicated piece of AOI (automatic optical inspection) equipment for evaluating remaining flux residues on PBT glass test boards. The system can be used by electronics ...
  • Consumer grade power inductors
    26 June 2019, Electrocomp, Passive Components
    Bourns is introducing the Model SRP7028C, SRP1038C and SRP1770C high-current shielded power inductor series, designed to meet today’s high current density requirements in various types of consumer electronics ...
  • High-current shielded power inductors
    26 June 2019, Electrocomp, Passive Components
    The inductive components product line at Bourns has created the Model SRP5050FA and Model SRP7030CA high-current shielded power inductor series, designed to meet today’s high current density requirements ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.