Test & Measurement


PVC-free temperature sensor

25 June 2008 Test & Measurement

With its M3000 series, Epcos has developed a temperature sensor with a PVC-free cable that contains no halogens, environmentally harmful plasticisers or stabilisers with heavy metals. This means that no corrosive or toxic gases are released in the event of a fire, and little smoke is produced. In addition, no dioxins hazardous to health are formed at the end of its lifecycle when the product is disposed of. The sensors already meet future specifications for restricting environmental hazardous substances in household appliances.

In temperature cycling tests, the M3000 series withstands a total of 50 000 cycles from -20 to +30°C in water as well as 1000 cycles from -40 to +80°C in air. The sensors also offer moisture resistance at temperatures up to 80°C. Their resistance drift is significantly below 2% after immersion in water at 80°C for 2000 hours and storage at 85°C and 85% relative air humidity.

In addition to refrigerators and freezers, the M3000 series is also suited to other applications such as floor heating systems.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

12-bit 1-wire temperature sensing
RS South Africa Test & Measurement
The DS18B20 digital thermometer from Analog Devices provides 9-bit to 12-bit Celsius temperature measurements in the range -55°C to 125°C.

Read more...
DC-link capacitors with ultra-low inductance
Electrocomp Passive Components
TDK Corporation recently released its new series of MKP DC high-frequency film capacitors, a high-performance DC link capacitor platform for next-generation SiC-based power electronics.

Read more...
Ultra-fast wideband RF insight
Vepac Electronics Test & Measurement
The Harogix PXE-200 is a high-performance real-time spectrum analyser designed for demanding RF environments up to 20 GHz.

Read more...
Field calibration made easy
Instrotech Test & Measurement
Built around modern component technology, an intuitive interface, and a rugged IP54-rated housing, Instrotech’s Calog series is engineered for the demands of real industrial field calibration work.

Read more...
Rugged two-pole voltage tester
Vepac Electronics Test & Measurement
A key advantage of the PeakTech 1094 is its battery-free operation, ensuring the tester is always ready for use whenever required by professional electricians or maintenance personnel.

Read more...
Rapid IoT prototyping simplified
Future Electronics Test & Measurement
The STEVAL-MKBOXPRO from STMicroelectronics is a compact, ready-to-use wireless development kit designed to accelerate the creation of intelligent IoT and wearable applications.

Read more...
High speed precision digital multimeters
Vepac Electronics Test & Measurement
Siglent Technologies has expanded its precision measurement portfolio with the SDM4000A Series digital multimeters, delivering a powerful combination of speed, accuracy, and usability for modern automated test environments.

Read more...
Non-contact linear position sensor
Electrocomp Test & Measurement
The Vishay 40 LHE Linear Position Sensor, designed for industrial motion control and automation, delivers robust, non-contact measurement performance using Hall effect technology.

Read more...
Compact 1250 V choke solution
Electrocomp Passive Components
TDK Corporation has introduced a new high-voltage common-mode choke series designed to support more compact and efficient 1250 V DC converter architectures in next-generation power electronics.

Read more...
Real-time monitoring for smart power distribution
CST Electronics Test & Measurement
By leveraging high-precision measurement, high-speed wave-recording, and AI-enabled analytics, the InHand Wireless Overhead-lines System empowers power utilities to accurately identify line faults and perform comprehensive load analysis.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved