Computer/Embedded Technology


Mini-ITX board enables dual digital displays

23 July 2008 Computer/Embedded Technology

VIA Technologies' new VIA EPIA M700 Mini-ITX board is the first to feature the VIA VX800 chipset, for sophisticated digital signage and retail display systems.

As today's information, entertainment and commercial display systems feature ever more immersive content, this board addresses the increasing demands for enhanced media playback and visual clarity across multiple displays in digital multimedia applications with support for dual-DVI or DVI plus HDMI configurations with unique resolutions, pixel depths and refresh rates.

Featuring a 1,5 GHz or a fanless 1,0 GHz VIA C7 processor, the M700 leverages the multimedia performance of the VIA VX800 unified chipset with its integrated VIA Chrome9 HC3 integrated graphics core for DirectX 9.0 3D graphics and up to six-channel VIA Vinyl HD Audio rich surround sound, while the VIA Chromotion video engine provides advanced hardware video acceleration and an improved visual experience for MPEG-2, MPEG-4, WMV9, VC1 and DivX video, plus a VMR capable HD video processor. It also supports up to 2 GB of the latest DDR2 system memory.

As multimedia file sizes grow, so speedy server connectivity is becoming increasingly important in dynamic digital signage and kiosk solutions, so the M700 boasts two PCI-Express based Gigabit LAN ports to facilitate wideband data transfer for large video and other files over networks.

As well as a front panel DVI port, pin headers for an additional DVI or HDMI port through a daughterboard are also included, as is support for 18-bit TTL displays. Digital video input is available through pin headers supporting CCIR-656/601//transport stream video, and there is also an S/PDIF connector. The VIA Vinyl VT1708B HD Audio codec supports up to six high definition channels with a 192 kHz sampling rate, delivering a richer all-round digital media experience.

Storage includes both an IDE port with a shared Type I Compact Flash port, two SATA II ports and up to six USB 2.0 ports, two through onboard connectors. Connectivity comes in the form of dual Gigabit LAN ports on the high speed PCI-Express bus. Data protection is assured with the integrated VIA PadLock Security Engine and the onboard MFX-01 module.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Intelligent video processing
Rugged Interconnect Technologies Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.

Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.

Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.

Read more...
Arrival of the Epic-PTH9
Vepac Electronics Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.

Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.

Read more...
An industry-first Android 16 smart module solution
RF Design Computer/Embedded Technology Telecoms, Datacoms, Wireless, IoT
The MeiG Smart SLM580 4G Smart Module features native support for Android 16 and covers core frequency bands in major countries and regions worldwide.

Read more...
Accelerate STM32-based IoT development with SPI EEPROM board
Altron Arrow Computer/Embedded Technology
ST Microelectronics’ ready-to-use STM32 expansion board helps design more efficient battery-friendly IoT devices based on ultra low power 32-Mbit Page.

Read more...
Unleash the next generation of Intel Core power
Vepac Electronics Computer/Embedded Technology
The EPIC-BTS9 from AAEON, is tailor-made to bring unprecedented performance to smart manufacturing and industrial robotics.

Read more...
QMC series I/O modules for VITA 93 small form factor mezzanine
Rugged Interconnect Technologies Computer/Embedded Technology
The new line of VITA 93 QMC mezzanine modules, from Acromag, are engineered to meet increasing demands for smaller form factors and more performance.

Read more...
MIKROE celebrates 2000th Click board
Computer/Embedded Technology
MIKROE has launched its 2000th Click board, the RTC 27 Click, designed for low-power real-time clock and calendar functionality, time tracking, alarm event generation, watchdog timing, and timestamp capture.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved