Jennic has announced the introduction of a ZigBee PRO software stack to run on its JN5139 32-bit single chip wireless microcontroller. Both embedded single chip and co-processor configurations are supported, allowing designers of industrial automation, energy metering and home or building control applications to create highly-integrated, cost-effective products.
When operating as an embedded single chip, the software stack and processor provide a high performance, feature-rich implementation that supports both the ZigBee PRO protocol and the user’s application. As a co-processor, it allows ZigBee PRO networking functionality to be added to existing designs and applications.
To accelerate time to market, ZigBee PRO is also offered with Jennic’s comprehensive range of FCC and ETSI certified modules, removing RF design complexity.
The JN5139 wireless microcontroller combines the ZigBee PRO stack with significant internal memory resources and power management to minimise energy consumption. It features 192 KBytes of on-chip ROM for the IEEE802.15.4 MAC and 96 KBytes of RAM for application software. It also integrates on-chip UARTs, SPI and 2-wire serial (I²C) interfaces, general purpose I/O (GPIO), timers, a 12-bit ADC, DAC and comparators, whilst power consumption is maintained below 5 μA in low-power sleep mode. The integrated 2,4 GHz, IEEE802.15.4-based transceiver supports a 100 dB link for indoor communication over 30 to 50 metres, as well as secure 128-bit AES encryption.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...18 W monolithic microwave amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
printer friendly version