XP Power has released the MTC15 and MTC30 dual output additions to its MTC series of fully encapsulated commercial-off-the-shelf (COTS) 4 to 35 W DC-DC converters.
Suitable for military and avionic platforms with a nominal 28 V d.c. input, the new 15 W and 30 W units are available with either ±12 V or ±15 V outputs.
Offering a wide input range from +15,5 to +40 V, the units can accommodate 10 V d.c. transients for 10 seconds and up to 50 V d.c. for one second as stipulated by MIL-STD 704B-F. Up to 80% of the full output power can be drawn from either the positive or negative output as long as the maximum output power is not exceeded. The converters’ feedback loop constantly monitors both outputs in order to provide a high degree of load regulation.
The converters also meet MIL-STD 1275A/B/C/D and MIL-STD 704A standards for surges and transients when used in conjunction with the MTF50 filter module. When this filter is installed, the converters also meet MIL-STD 461E/F for conducted emissions and susceptibility. The units meet the environmental MIL-STD 810F specification that covers shock, vibration, humidity, temperature, salt spray and altitude. Case operating temperature range is from -40 to +100°C. Units that can accommodate an operating temperature down to -55°C are also available to order.
Control lines provide the ability to inhibit the output and to synchronise the switching frequency to an external frequency source in the range of 400 to 500 kHz.
Rugged spectrum analyser Vepac Electronics
Test & Measurement
The HAROGIC PXR Series is designed for maximum durability and performance in the most demanding environments.
Read more...Setting a new benchmark for high-power DC load testing Conical Technologies
Test & Measurement Power Electronics / Power Management
The new ITECH IT8900G/L high-speed, high-power DC electronic load offers a powerful combination of speed, scalability, precision and high-power density.
Read more...Streamlining Device Programming with the AutoBee-D1 Vepac Electronics
Manufacturing / Production Technology, Hardware & Services
The AutoBee-D1 desktop automated programmer is designed to simplify the programming of devices, while delivering consistent accuracy, high throughput and reduced manual intervention.
Read more...200 W of power in a space-saving design Vepac Electronics
Manufacturing / Production Technology, Hardware & Services
The Hakko FX-972 Soldering Station delivers high-performance soldering in a compact package, making it suitable for a wide range of soldering applications.
Read more...Arrival of the Epic-PTH9 Vepac Electronics
Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.
Read more...Precision power for electronics testing Vepac Electronics
Test & Measurement
The PeakTech 6168 switching power supply is a versatile and reliable solution designed for professional applications in laboratories, development environments, service centres, and training facilities.
Read more...200 W of power in a space-saving design Vepac Electronics
Manufacturing / Production Technology, Hardware & Services
The Hakko FX-972 Soldering Station delivers high-performance soldering in a compact package, making it suitable for a wide range of soldering applications.
Read more...Quality batteries are critical for IIoT Uniross Batteries
Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.
Read more...12 kW hybrid inverter
Power Electronics / Power Management
Sungrow recently unveiled its next-generation residential energy storage solution, expanding its power range from 5 kW to 12 kW with the introduction of the new MG12RL hybrid inverter.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version