Telecoms, Datacoms, Wireless, IoT


Highly integrated 2,4 GHz RF front end

17 September 2008 Telecoms, Datacoms, Wireless, IoT

The CC2591 from Texas Instruments is a highly integrated 2,4 GHz radio frequency (RF) front end for low-power and low-voltage wireless applications. It increases the link budget in wireless systems by integrating a power amplifier for output power of +22 dBm and a low-noise amplifier for receiver sensitivity of +6 dB.

The IC is applicable to all 2,4 GHz wireless systems, such as ZigBee networks, sensors and industrial, consumer and audio equipment. It integrates a power amplifier, low-noise amplifier, balun, switches, inductors and RF-matching network. It has a 4,8 dB LNA noise figure and operates from 2 to 3,6 V.

The device consumes 100 nA in power-down mode. Transmit current consumption is 100 mA at 3 V for 20 dBm output, while receive current consumption is 3,4 mA in high gain mode and 1,7 mA in low gain mode.

For more information contact EBV Electrolink, +27 (0)21 402 1940, capetown@ebv.com, www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Two-stage linear RF power amplifier
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The CMX90A006 from CML Micro is a two-stage linear RF power amplifier delivering +33 dBm of output power over the frequency range of 860 to 930 MHz.

Read more...
Multi-band satellite modules
RF Design Telecoms, Datacoms, Wireless, IoT
The UBX-R52/S52 Series from u-blox are Multi-band LTE-M/NB-IoT/Satellite Modules that operate in 3GPP cellular bands from 450 MHz to 2,46 GHz and 1,5 to 1,7 GHz for satellite connectivity.

Read more...
Three new short-range radio modules
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The modules are the FC30R, a cost-effective, industrial-grade Wi-Fi module; the FCU743R, featuring Wi-Fi 4 and Bluetooth 5.2 capabilities; and the FCM740D, an MCU with Wi-Fi 4 and Bluetooth 5.2.

Read more...
Open-source flexibility for IoT gateway
Vepac Electronics Telecoms, Datacoms, Wireless, IoT
The SRG-CM4 brings all the open-source flexibility of the Raspberry Pi OS and ecosystem to AAEON’s signature rugged, durable gateway design to create a truly industry-ready, modular system.

Read more...
5G RedCap and its current environment
RF Design Telecoms, Datacoms, Wireless, IoT
5G RedCap is expected to be a key driver of the transition from 4G to 5G technology for many IoT applications.

Read more...
Quectel adds to its portfolio
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The modules are the FC30R, a cost-effective, industrial-grade Wi-Fi module; the FCU743R, featuring Wi-Fi 4 and Bluetooth 5.2 capabilities; and the FCM740D, an MCU with Wi-Fi 4 and Bluetooth 5.2.

Read more...
Dedicated NETGEAR switches for AV-over-IP applications
Telecoms, Datacoms, Wireless, IoT
The NETGEAR range of Pro AV switches, available from Duxbury Networking, provides professional audio/video (AV) users with high quality, low-latency video and audio distribution over an IP network.

Read more...
Matter-over-Thread smart locks
RS South Africa Telecoms, Datacoms, Wireless, IoT
Austrian smart lock manufacturer Nuki is using Silicon Labs solutions in the fourth-generation Nuki Smart Lock, the world’s first smart lock with native Matter-over-Thread support.

Read more...
Harnessing IoT for the future of agriculture
Telecoms, Datacoms, Wireless, IoT
As the agricultural landscape becomes more complex, there is a need for adopting scalable and adaptable connectivity solutions.

Read more...
Wireless LTE connectivity
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Links Field Network’s focus is international roaming data, and by leveraging their holding company’s international footprint and pricing structure, Links Field Networks South Africa works closely with their local shareholder to offer fully connected devices, regardless of where it is to be used globally.

Read more...