ESBT for SMPS designs
1 October 2008
Power Electronics / Power Management
STMicroelectronics has introduced a new ESBT (emitter-switched bipolar transistor) power switch, which enables engineers to improve efficiency, cost, component count and size in auxiliary switched-mode power supplies (SMPS) for single- and three-phase applications.
The STC03DE220HV is the first in a new family of ESBTs rated for 2200 V breakdown voltage, allowing designers to use a single-switch flyback topology in universal-input converters operating from 90 to 690 V a.c.
Operating efficiently at 150 kHz maximum switching frequency and 3 A maximum rated current, the STC03DE220HV can be used in a wide range of auxiliary SMPS applications including industrial utility metering, inverter drives for induction motors, welding equipment and uninterruptible power supplies.
Using ESBT technology, the STC03DE220HV betters standard bipolar transistors as well as high-voltage MOSFETs by combining low on-state losses with the traditional MOSFET advantages of high switching frequency and easy gate-driver design. The STC03DE220HV achieves an equivalent on-resistance of 0,33 Ω, from the collector to source.
Further reading:
NVDC power-path control to 1– 6 cell battery systems
iCorp Technologies
Power Electronics / Power Management
SG Micro’s SGM41581 is an I2C-controlled narrow voltage direct charging buck boost charge controller designed to simplify robust power delivery in systems that must seamlessly operate from an adapter input or a battery pack.
Read more...
Precise, adaptive battery health-monitoring
RS South Africa
Power Electronics / Power Management
New fuel gauge solution from Nordic delivers State-of-Health reporting, adaptive battery modelling, and seamless fleet observability via nRF Cloud.
Read more...
Compact 6 A automotive buck converter
Altron Arrow
Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.
Read more...
The new role of UPS technology in high-precision automation
Omron Electronics
Power Electronics / Power Management
OMRON’s BU_2SW and BU_2RWL series UPS systems are engineered to offer a robust, online type power architecture designed to safeguard sensitive AC powered systems across a wide range of industries.
Read more...
Rugged railway-grade DC-DC power modules
iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...
Four-quadrant regenerative grid simulator
Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...
90 W PSU with 150% boost capability
Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...
Standalone USB PD controller
Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...
Power module enhances AI data centre power density
Altron Arrow
Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.
Read more...
MIL-Spec DC-DC power converters
Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...