Low-profile power inductors

15 October 2008 Power Electronics / Power Management

Taiyo Yuden has announced its new NR6028 series of 6 x 6 x 2,8 mm (l x w x h) wire-wound power inductors optimised for DC-DC converter choke coil applications in LCD/plasma TVs and other flat panel displays (FPDs). The 13 models in the series offer a combination of low DC resistance (0,013–0,6 Ω), high inductance (0,9–100 μH) and high current ratings (0,62–6,6 A).

Because of the advances in FPD technology, in which most ICs require their own power supply, there is ever greater demand for choke coils (a primary component in DC-DC converters) with higher current capacity, lower DC resistance and smaller physical size. Boosting current capability, however, requires increasing the size of the core and thickening the windings inside the inductor, both of which make reducing device size very difficult.

Taiyo Yuden responded to this challenge by improving the round drum/sleeve core technology used by conventional inductor designs. A unique sleeveless, square-core winding was developed for use in NR series inductors that successfully eliminates wasted space and thickens the lead wire inside the inductor to achieve low DC resistance.

Further reading:

4 kW e-mobility DC-DC converter
Brabek Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.

Read more...

---

Aluminium case upgrade boosts performance
Vepac Electronics Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.

Read more...

---

Extending the range of power converters
RS South Africa Power Electronics / Power Management
Power Integrations recently announced a breakthrough in flyback topology extending the power range of flyback converters to 440 W - well beyond the limits that traditionally required more complex resonant and LLC topologies.

Read more...

---

Power-dense modules operate up to 115 V DC
Brabek Power Electronics / Power Management
The RPMVH-0.5 series of cost-effective, non-isolated buck regulator modules from RECOM delivers 0,5A of output at fully regulated voltages up to 24 V DC.

Read more...

---

Finding value for money with your IoT battery
Uniross Batteries Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.

Read more...

---

Powering the IoT
Uniross Batteries Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.

Read more...

---

The move to DC infrastructure
IOT Electronics Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.

Read more...

---

Power inductor for automotive applications
Würth Elektronik eiSos Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.

Read more...

---

High-performance DC-DC converter
Conical Technologies Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.

Read more...

---

DC-DC converters for next-generation IoT
iCorp Technologies Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.

Read more...

---